Condor Dolphin

Condor DolphinXhorse Condor Dolphin key cutting machine

How to Solve Dolphin XP005L M5 Clamp Can’t Move Problem?

Problem: I wanted to remove the M5 clamp on my dolphin xp005l key cutting machine, but no matter how I rotated the handle, the clamp wouldn’t move at all. The solution: Please try to solve it with the following method. 1.Rotate this handle to remove the clamp 2.The issue is not about removal but the […]

Read More

Condor DolphinXhorse Condor Dolphin key cutting machine

Xhorse Dolphin XP005 Update Review

Today I do an update to my dolphin xp005 with the Xhorse upgrade kit software showing how easy it is… A windows based PC is REQUIRED. I have it installed already & have for over 3 years. I did a key cut right after I did the calibration because a customer walked in and needed a duplicate. […]

Read More

Condor DolphinCondor XC-Mini Plus

Xhorse Dolphin XP005L VS Condor XC Mini Plus

What’s the difference Xhorse Dolphin XP005L and Condor XC Mini Plus besides the price? Dolphin XP-005L ≈ Dolphin XP-005 software (function) + Condor XC-MINI Plus firmware Check the detailed comparison table below:   Item Dolphin XP-005  Dolphin XP-005L Condor XC-MINI Plus Image Price (USD) 1578 1923 2499 Weight (Net) 15kg 13kg 18kg Weight (Gross) 18kg […]

Read More

Condor DolphinXhorse Condor Dolphin key cutting machine

How to Solve Xhorse Dolphin XP005/XP005L Error Code 42?

Customer problem: I use my new Dolphin XP005L and key tool max pro to cut Hon66. It is already calibrated. When I send the order to cut, it reaches 1%, the red light comes on and prompts “error code 42”. I already tried another cutter and tried, but the error still exists. Here is the suggestion: Step 1: […]

Read More

Condor DolphinXhorse Condor Dolphin key cutting machine

How to Solve Dolphin XP005 Cut HU198T Error Code: 33?

Customer problem: I can’t cut hu198t from dolphin xp005 machine or app. App shows this message “error code: 33 cutter diameter too larger”. Here is the solution: 2.5mm won’t work on that, needs smaller like it says. You need to use the 1.5mm cutter and probe. Refer to: How to Solve Dolphin XP005L Error Code: 33 cutter diameter too large? Tech support: Email: […]

Read More

Condor Dolphin

How to Fix Dolphin XP005 Copy Honda Civic Key Error?

Customer problem: I am not able to copy this honda civic key 2011 by Dolphin XP005. I tried the database and the universal key duplication with no luck. What can I do? The one on the left is the copy right is working key. The top of the key gets stuck in the lock.   […]

Read More

Condor Dolphin

Suzuki Wagon R 2019- Add New Key by Xhorse Tool

Topic: Which Xhorse tool can add new key to Suzuki Wagon R 2019- ? Xhorsetool.com engineer’s suggestion: You can perform the key programming function by the following Xhorse devices. Xhorse Key Reader+ Dolphin XP005 Xhorse Key Tool Max with Mini OBD+ Dolphin XP005 Xhorse VVDI Key Tool Plus Pad Check the detailed operations. Xhorse Key Reader+ […]

Read More

Condor Dolphin

HON66 Decoding Issue with Xhorse Key Cutting Machine Solution

Customer Problem: How to decode hon66 – all of them are 6-6 cuts which doesn’t fit to my crv blade. Xhorse key cutting machine users’ suggestions: @Les Moyer Cut 6 on both sides needs to be a 1. On worn keys, the last few cuts can be mis-read as deeper than they should be. @Wire Works I’ve […]

Read More

Condor Dolphin

How to Solve Xhorse Dolphin XP005 Error Code 29?

Here share the solution to resolve Xhorse Dolphin XP005 Error Code 29. Problem: Use Dolphin XP005 to cut key, it cannot cut the key normally. Try the height level adjustment, X axis motor test and Z axis motor test, all fails and get the error code: 29. I also do a conductivity test, the cutter and […]

Read More

Condor DolphinXhorse Condor Dolphin key cutting machine

How to Solve Xhorse Dolphin XP005L Error Code: 6?

Problem: When I use Dolphin XP005L to do key cutting calibration, it can move forward and backward only, not sideways. The screen displays an error ‘ERROR CODE: 6 Detected cutter’. Xhorsetool.com engineer replied: Please go to ‘Device information’>> ‘Cutting setting’>> ‘Clamp’ Select ‘M5’ in the clamp option which is at the bottom of the interface Save it after setting Then […]

Read More

Condor Dolphin

Xhorse Dolphin XP005L Tutorials: How to Activate/Update/Calibrate?

If this is your first time to use the new Xhorse key cutting machine- Dolphin XP005L, three steps are required to do before cutting key: combine the device (activation), update firmware and database, and calibrate the key. Kindly notice: Please remove the protective bracket before any operation. 1.How to activate Dolphin XP005L? When you receive […]

Read More

Copy Protected by Chetan's WP-Copyprotect.