Tutorial: how to use Xhorse CONDOR XC-MINI PLUS II key cutting machine to duplicate RB Locks Dimple Key.
Original RB locks Dimple key
Blank key
Step1: Set parameter
Tap Settings>> Cutting Setting>> Probe and cutter diameter setting
Set probe diameter to 1.0mm
Set dimple- cutter to Dimple cutter (Both)
Click ‘Save’
Step 2: Insert the probe and the cutter
Step 3: Learn key
Go to the main menu
Tap Household>> All regions>> RB Locks>> Dimple key with sided internal dimple>> Dimple key with sided internal dimple2
Select ‘Dimple (internal) (Front)’
Insert the original key
Then tap ‘Decode key’
The key (front) learning is done, then select ‘Dimple (external) (Front)’ to decode
Key learning is successful.
Step 4: Cut key
Put the blank key on the XC Mini Plus II key cutting machine
Tap Dimple (internal) (Front)>> Start cutting>> OK
Flip the key to cut again
After cutting the Dimple (internal) (Front) successfully, go to cut Dimple (external) (Front).
Cutting key completed
Finally, insert the key has cut into the cylinder to test.
Read more:
CONDOR XC-MINI PLUSⅡTutorial: How to Duplicate Mul-T-Lock Dimple Key