It’s test ok to cut Honda Key using Xhorse Condor Dolphin XP005 with VVDI key tool max.
Honda Activa 3G key
Connect key tool max with Dolphin XP005 via Bluetooth
Open Xhorse APP, enter Dolphin main menu
Select All Key Lost-> Honda (Cycles)
Input code and click QUERY
Pay attention to the clamp type:
1.M1 clamp shoulder align
This type recommends 1.5mm to cut.
2.Key fixed. Clear metal fillings and use your finger to press the blank key on the clamp and make sure it is flat.
Press Cutting key and click Continue
It will take about one minute to cut the key
Cut Honda Activa 3G key successfully
Finally, insert the key has been cut into cylinder to test