One customer inquired about the operation guide for using the Xhorse VVDI MLB Tool to back up Sync, CS, and PIN data.
Here is the simple guide:
Follow the three steps below to operate and select the path to save the key data file based on your preference.
Select MLB type
Step 1: Identify key
Place the key in the VVDI MLB Tool identification area for identification.
Step 2: Collect key data
Open the original car key, connect the original car key PCB as shown in the diagram, and click the collect key data button after connection.
It will take about 3-4 minutes.
The server takes approximately 10s to calculate.
After the calculation is completed, save the calculation results.
Step 3: Make dealer key
Load the calculation data saved in the second step and generate3 dealer keys.
Then use Xhorse VVDI2 or VVDI Key Tool Plus Pad for key learning.
