Xhorse Dolphin XP-005L Tag Archive
How to Solve Dolphin XP005L Cut Kia Key is Shorter than Original?
Customer problem: I used the dolphin xp005l to cut a Kia key, but after cutting, the new key groove was shorter than the working key. What I did was as follows: Tapped Vehicle database, selected Kia/Ceed, 2007-2010, KK10, followed the instruction to put the blank key on M5 clamp, and started to cut key. Xhorsetool.com engineer replied: Select [Universal Key Duplication] to […]
How to Replace Xhorse Dolphin XP-005L Touch Screen?
If the touch screen of Xhorse Dolphin XP005L key cutting machine cannot turn on, you’d better take apart the screen to check if the cables are loose. If the problem cannot be solved, please change a new screen. Steps to replace Dolphin XP005L touch screen: Step 1: Remove the back case and handle Remove all […]
2023 Xhorse Dolphin XP005L Common Problems and Solutions
Here have collected some new common problems and solutions about Xhorse Dolphin XP005L Automatic Key Cutting machine. Main contents: Error Code 22 and 36 Error Code: 6 Detected cutter Security Code Invalid Display Wrong Time after Reset 1. Xhorse Dolphin Machine Error Code 22 and 36: Use Xhorse Dolphin key cutting machine and VVDI Key Tool […]
How to Solve Xhorse Dolphin XP005/XP005L Error Code 42?
Customer problem: I use my new Dolphin XP005L and key tool max pro to cut Hon66. It is already calibrated. When I send the order to cut, it reaches 1%, the red light comes on and prompts “error code 42”. I already tried another cutter and tried, but the error still exists. Here is the suggestion: Step 1: […]
How to Fix Xhorse Dolphin XP005/XP005L Error Code 80: Device Initialize Error?
Issue: Use Xhorse Dolphin XP005L alone or use Dolphin XP005 with Key Tool Max Pro/smartphone to cut keys, appears “error code 80, device initialize error” as shown in the figures below. Xhorsetool.com engineer’s suggestion: 1.Update firmware, calibrate machine, and try again 2.If not solve, go to perform Electrical Conductivity Measurement Device information>> Electrical conductivity measurement>> follow the on-screen instruction below […]
How to Get Factory Key Code with Xhorse Dolphin XP005L?
One customer gave feedback that he could get the bitting from the key by decoding with Xhorse Dolphin XP005L key cutting machine, but he didn’t know how to obtain the actual factory key code for a key once decoded by the machine. This problem has been resolved now. If you have the same problem, follow the solution below to […]
How to Cut Plastic/Aluminium Key by Xhorse Dolphin XP-005L?
One customer gave feedback that he wanted to use Xhorse Dolphin XP005L to cut Plastic/Aluminium key, and he found instruction on Google, but he didn’t see the option ‘Plastic/Aluminium key cutting’ in his key cutting machine. So he asks for help to cut the key. Some users share their related suggestions below. Suggestion 1: First use […]
Dolphin XP005L Decode and Cut Toyota TOY40 One Side Key- Success
The Toyota TOY40 emergency key is very thin, only 1.5mm. Condor XC Mini Plus and Dolphin XP005 use M2 clamp and bar adapter, but the new Xhorse Dolphin XP005L can cut with M5 clamp by no need more adapters. Let’s check how it decode and cut key on TOY40 one side key. Turn on Dolphin XP005L key cutting […]
How to Solve Dolphin XP005L Error Code: 33 cutter diameter too large?
Problem: When I want to use Dolphin XP005L to cut a TOY40 emergency key (one side key, 1.5mm) to my Toyota, it suddenly pops up an error prompt ‘error code: 33 cutter diameter too large’. At the same time, the red light innovative indicator lights shown. What’s wrong with it? Xhorsetool.com chief engineer replied: The Toy […]
How to Solve Xhorse Dolphin XP005L Error Code: 6?
Problem: When I use Dolphin XP005L to do key cutting calibration, it can move forward and backward only, not sideways. The screen displays an error ‘ERROR CODE: 6 Detected cutter’. Xhorsetool.com engineer replied: Please go to ‘Device information’>> ‘Cutting setting’>> ‘Clamp’ Select ‘M5’ in the clamp option which is at the bottom of the interface Save it after setting Then […]
Xhorse Dolphin XP005L Tutorials: How to Activate/Update/Calibrate?
If this is your first time to use the new Xhorse key cutting machine- Dolphin XP005L, three steps are required to do before cutting key: combine the device (activation), update firmware and database, and calibrate the key. Kindly notice: Please remove the protective bracket before any operation. 1.How to activate Dolphin XP005L? When you receive […]
