Xhorse key tool plus Tag Archive

VVDI Key Tool

VVDI Key Tool Plus Generate 2015 BMW 740Li CAS4 Key

2015 BMW 740Li F Chassis CAS4 add new key using Xhorse VVDI Key Tool Plus. Not unlock but read the DFLASH info along with the PFLASH.   Step 1: read original CAS4 DFLASH and PFLASH data Use the screwdriver to dismantle the CAS from the car Then go to get everything set up Take out […]

Read More

VVDI Key Tool

Solution for Xhorse Key Tool Plus Self-test error: FPGA certification error

Customer problem: When I used VVDI Key Tool Plus to read eeprom, it prompted ‘Self-test error: FPGA certification error’. It just happened occasionally. Sometimes I restarted the device 4-5times and it used normally, but sometimes it still stopped working. Xhorsetool.com engineer replied: There is something wrong with the PCB. You’d better send it back to repair. […]

Read More

VVDI Key Tool

(Fixed) Xhorse VVDI Key Tool Plus “insufficient points”

Problem with Xhorse VVDI Key Tool Plus: when reading / writing key for Benz via IR, got message “Device points is less than 10: insufficient points, please go to Update Center to synchronize your device and try this function again!” Working solution: Go to Update——> Device Synchronization——> once device resyncs try the Read again. The Charge […]

Read More

VVDI Key Tool

Cloned ID48 using Xhorse Key Tool Plus with 3 paid token

Test report: I cloned id48 with Xhorse Key Tool Plus but for more than an hour while I bought a token. Is there any better option than bought a token? You get free bonus points when you generate a remote, if you have xhorse remotes just go and generate a couple of them until you get to 200 bonus points […]

Read More

VVDI Key Tool

How to connect Xhorse XDKP30 Multi-function Adapter for Key Tool Plus?

Problem: got one Xhorse XDKP30 Multi-function Adapter for Key Tool Plus, the only socket I can use it the Bosch. The problem in detail: I need something to link those 2 sockets as every time I try to read an EZS unit it says cracked chip and maybe because it is not connected properly its […]

Read More

VVDI Key Tool

VVDI Key Tool Plus OBD add new remote Mercedes Spinter W906 2010

Have Xhorse VVDI Key Tool Plus to add new remote for Mercedes Spinter W906 2010 via OBD. Connect cable to OBD2 Port. Tap “Immo Programming ->European -> Benz -> Automatically diagnostic models -> Start programming. There is 1 time for free calculation. Tap “Process Wizard mode”. Press “Begin” to learn the procedure on the screen. […]

Read More

VVDI Key Tool

VVDI Key Tool Plus Duplicated Audi A5 2013: Done

Xhorse VVDI Key Tool Plus Feedback: Duplicated Audi A5 2013 successfully. There push in dash on A5 does not need to be proximity key. I think in this case if it was slot and also prox. Simple guide: Read BCM, preload key, and learn key. If the key is already scheduled, pre-loading the key in the […]

Read More

VVDI Key Tool

How to fix VVDI Key Tool Plus ID48 online calculation”Don’t have enough bonus points”?

Problem: Used Xhorse VVDI Key Tool Plus to do ID48(96 bit) online calculation, got error “The device don’t have enough bonus points for calculation, please collect points first, also you can recharge token for calculation!”. How to do next? Method 1. charge token for calculation The Device need token to complete this operation and program […]

Read More

VVDI Key Tool

How to Solve Xhorse VVDI Key Tool Plus Cannot Do Any Function?

I have a vvdi key tool plus. I used it for many times. But when I used it yesterday, there was something wrong with it. It could start normally. But when I tapped any function on the main menu, it didn’t do anything. I tried to exit and started it, it could boot normally, but […]

Read More

VVDI Key Tool

Honda CR-V 2019 Smart Key Programming by Xhorse VVDI Key Tool Plus

Have a Honda CR-V 2019 ID47- 433Mhz, and need to program a smart key. It’s done by Xhorse VVDI Key Tool Plus Pad. Issue: The original key can start the car normally. The new key not programmed cannot start the car. The procedure: Connect VVDI Key Tool Plus to the vehicle via the main cable Push […]

Read More

VVDI Key Tool

VVDI Key Tool Plus Unlock Nissan Micra Smart Key No Issues!

Used Xhorse VVDI Key Tool Plus Pad to unlock Nissan Micra smart key, it worked like a charm! It’s Nissan smart key. Open the key shell and take out the PCB Connect the PCB with Key Tool Plus properly with the professional cable Put it into the keyhole of Xhorse Tablet Select “Transponder Clone” on the VVDI Key […]

Read More

Copy Protected by Chetan's WP-Copyprotect.