Tips to Read VW Golf MK7 Dash (5G0920860A) by Xhorse XDNP80 Adapter

VVDI Key ToolXhorse Adapter

Written by:

How to use Xhorse VVDI Key Tool Plus Pad and XDNP80 Adapter to read VW Golf MK7 Dash (5G0920860A)?

Here shares a useful tip to read the 5G0920860A without bending pins.

The GND pin on the dash is misaligned by 2mm with the XDNP80 adapter, but manually soldering it solves the issue. D6 pin on adapter is not needed for reading. And don’t forget 12V.

“I didn’t want to bend the pin because this adapter is OK for 90% pcb I have. Solder in this case is a 30sec job.”

Credits to @Nedim!

www.xhorsetool.com

Copy Protected by Chetan's WP-Copyprotect.