VVDI2 PSA read Citroën PIN and key learn

Xhorse VVDI2 Key Programmer

Written by:

How to use VVDI2 PSA software to read pin codes and do key learning for Citroën cars? Here is a how-to guide for you all. Hopefully, it’s helpful.


Engineers working for xhorsetool.com confirm this functions:

vvdi2 100% OK for Citroën read pin and key learn

Attach photos:

use vvdi psa software

read pin available

every time switch ON ignition, switch OFF/ON times vvdi increase 1

if the times not increase, please switch OFF ignition again, take key off ignition switch, wait above 10 seconds, then switch ON

repeat the procedure until the switch OFF/ON times increase 1

key learning

the working vvdi2 key programmer


VVDI 2 Peugeot, Citroën reviews:

citroen c4 work 100% for read pin
tested 100%


i read on Monday c4 pin with version 4.0… no problem 2006


citroen c4 I can confirm also it is working


I did c4 No problem


just read the pin and cs from ecu.

make backup from cluster, and the cluster configuration.

then make a dealer key, and learn it with pin.

my Peugeot 308 2008 BSI JC pin extracted OK. Key learn OK.

Tip: only for CAN line protocol based Peugeot, Citroën and DS cars

Copy Protected by Chetan's WP-Copyprotect.