VVDI2 MQB user manual: MQB normal/smart key link, MQB authorization, vehicle coverage, how to program key

Xhorse VVDI2 Key Programmer

Written by:

Finally, here comes MQB remote
VVDI2 MQB authorization:
VVDI2 MQB vehicle coverage:
VVDI2 works for MQB NEC35xx immoblizer/ dashboard below:

Audi A3/S3 2014+

Audi Q2

VW Golf7

VW Polo(MQB)

VW Tiguan II

VW Touran II

VW crafter 2017+

VW Passat B8 without virtual cockpit

Skoda Octavia III 2014.07+

Skoda Rapid 2015.06+

Skoda Kodiaq

Skoda Superb III

Seat Ibiza/Ateca/Toledo 2015.06+


Example: VVDI2 MQB key program

Step 1: Automatic recognition system.

Open VVDI2 app, select the option “VAG”

The computer is communicating with the device, please wait…

Turn on the dashboard

Click on “Diag”

Click on “Read EEPROM/FLASH”, then NEXT.

Step 2: Read EEPROM

Click on “OK”

Start Security login…(you can see at the left corner of the window)

This is MQB smart key, click on “OK”

Reading data, please wait…Both the EP data and IMMO data need to be read out.

Read eeprom data successfully, click on “Save File” save as name “ep”

Step 3: Read IMMO data and save.

Click on “Read IMMO data“.

Save IMMO data successfully

Step 4: Use New key prepare dealer key.

Click on “Make dealer key”.

Tick on “Prepare normal dealer key”, then “Next”.

Get message “Warning: If you make dealer key with normal key, it doesn’t support online change immobilizer.

Follow units will not support online immobilizer :

01- Engine

02- Gearbox

17- Instrument

19- CAN gateway

2B – electronic steering column lock

Advise you choose the option “OEM”, OEM dealer key have same ID with original one, support online operation.

Continue Prepare normal dealer key?

Click on “Yes” to continue.

Are you sure you want to generate Audi normal dealer key?

Please make sure the make is correct, if you choose wrong, please return back to choose again.

Click on “Yes”

Put the original key into the VVDI2 antenna then click on “OK” to confirm.

Please input the original new MQB key into the VVDI2.

Step 5: Perform Key learn

Use “Reset Instrument” to active instrument after all the operation is finished.”

Get message “Note: before learning the key, please firstly save EEPROM and IMMO data (Important), If you have already backup you can continue, otherwise please backup EEPROM and IMMO data first. ”

The first one key is learned successfully, you can see 1-2 on the dashboard.

To learn the second key. Insert the dealer key into the car and switch on for at least 2 seconds. The time for change key should smaller than 5 seconds, press Okay button after all keys are learned.

Click on ” Okay”

Learn succeed, you can see 2- on the dashboard.

You see the left corner status ” All keys successfully learned”

Pull out the key from the ignition to test it can start the car.


VVDI2 programs VW MQB NEC35XX system smart keys successfully.


Copy Protected by Chetan's WP-Copyprotect.