Instructions:
1_ turn ignition on with working key .
2_ get pin code and cs code.
3_ make dealer key with know 7th bit.
3_ key learning and i put 2 key.
4_ turn ignition off thin ignition on with working key. And press ok thin turn ignition on with all key thin press ok .

Note that in the process of inserting each key and giving it ON
Each key should not be ON more than 5 seconds (better 2 seconds ON), else, the system will close on the first key which exceeds 5 seconds!

You should repeat again learning all keys.

Tech support from xhorsetool.com