Adding an extra smart key to a 2017 Toyota Camry Hybrid can be completed quickly with Xhorse VVDI Key Tool Max Pro when at least one working smart key is available.
This guide demonstrates the complete smart key registration procedure, from vehicle selection to successful key verification.
Step 1: Enter Toyota Immobilizer Programming
Power on Key Tool Max Pro and select:
Immo Programming → Toyota
Step 2: Select the Vehicle
Navigate to:
Select by Area → Other Areas → Camry
Step 3: Choose the Smart Key System
Open the following menu:
Keyless Go → 2013-2017 → Type 1 (8A-Page P4 88)
Step 4: Open the Programming Menu
Select Immo Programming.
The following functions are available:
• Backup Smart Box EEPROM Data
• Generate Emergency Key
• Add Smart Keys
• Clear Smart Keys
• Synchronize ECU and ID
Step 5: Select Add Smart Keys
Tap Add Smart Keys.
The tool will notify you that an internet connection is required for this operation. Connect the device to the network and press OK.
Step 6: Read Vehicle Information
Turn the ignition ON as instructed and tap OK.
The tool will read vehicle information and display:
• Number of registered keys
• Available key registration slots
Step 7: Verify an Existing Smart Key
When prompted, place a registered smart key against the engine start button.
Press OK and keep the key in place until a confirmation beep is heard.
Step 8: Register the New Smart Key
After the original key is verified, place the new smart key against the start button.
Tap OK and keep the key close to the button until the device detects it.
Step 9: Complete Programming
Wait for the programming process to finish.
Once completed, the tool will display:
Key Registration Succeeded!
Step 10: Confirm the Result
After programming is complete, verify the number of registered smart keys.
In this case, the key count increased from three registered keys to four, confirming that the new smart key was successfully added using Xhorse Key Tool Max Pro.
