Xhorse Multi-Prog is coming soon! It’s a 2023 powerful Pro-level ECU programmer made by Xhorse. This programmer has built-in update software, supports self-test and smart operation mode, and will be a good device to read BMW ISN and clone various brands of ECUs, TCUs, etc.
Why do you need an Xhorse Multi-Prog Programmer?
Here are the top 8 reasons below:
1. Built-in update software: Make Multi-Prog firmware update timely.
2. High-speed USB communication interface: Make software automatically connect.
3. Smart operation mode: possible causes of error will be listed.
4. Reserve ports: For future update.
5. Self-test function: Check if the machine works well or not.
6. Power supply: Through a USB cable, the software will automatically prompt if the external USB power supply is needed.
7. Get free BMW ISN read function and NEC, MPC, Infineon, etc chip continuously update service.
Which ECU/TCU models and features does Xhorse Multi-Prog ECU Programmer support?
1. Read & Write and Clone ECU
- BMW B48/B58 reading ISN
- BMW MSD80/81 /85/87/MSV90
- Mercedes-Benz SIM271
- BMW MSV80
- VW BOSCH MED17 Series ECU
- BMW N13/N20/N55/B38/TC17X
- Support Marelli, Siemens, Delphi and other ECU manufacturers
2. Read & Write and Clone TCU
- Volkswagen Audi Skoda DQ200, DQ250, VL381 TCU etc.
- Porsche DL501 TCU
- Ford Dodge and other MPS6 series TCU
- BMW DKG, Mercedes-Benz VCS and other models TCU
3. Vehicle Engine Data Calculation and Processing
- MED17/EDC17 data processing
4. Support Flexible Extension of Third-party Plug-ins
- Support the development of third-party plug-ins and provide data processing and modification services
5. Read & Write MCU
- Support reading and writing MCU of various brands including Renesas, Motorola, NXP, Infineon, etc.
- Support certain encrypted chip reading and writing
6. Read & Write Vehicle IMMO Module
- Support Porsche, Land Rover, Mercedes-Benz EZS, VOLVO, VW MQB dashboard, AUDI BCM2, etc.
- Support modules including BMW EWS, CAS1 \CAS2\CAS3\CAS4+, FEM BDC, etc.
- Support other common IMMO modules
Note: Compatible with Xhorse solder-free adapters and cables
7. Read & Write EEPROM
- Support EEPROM and FLASH
8. Read & Write Vehicle Dashboard
- Support dashboard of VW, Honda, Hyundai, Kia, etc.
For the detailed ECU and TCU models, download Xhorse Multi-Prog support list. It is a long image, please scroll through it.
Xhorse Multi-Prog Programmer ECU Programmer can be pre-ordered now. It will be available at xhorsetool.com in about 2 weeks.
https://www.xhorsetool.com/wholesale/xhorse-multi-prog.html
