New Xhorse app replaced KEYTOOL app (07.2019)


The old KEYTOOL app can’t be used by the 1st July 2019

KEYTOOL app will be replaced by Xhorse app

The old KEYTOOL app cannot be used any more


How to download new Xhorse App:

Pls scan the codes or search with “Xhorse” in App store (iPHONE) or in Google Play  (Andriod)

New Xhorse app on iPhone:

New Xhorse app on Android:


Xhorse launched a new global version of remote database v201


VVDI Key Tool can copy VW 48 96 bit chip

Success! Xhorse VVDI Key Tool is confirmed to copy VW 48 96 bit transponder.

It’s very easy to collect data of the original key and then upload data to write to the new chip. That’s all.

Here is the how-to’s in detail.

The VVDI Keytool and app on an Android device, the key..

The dash

Note: All will be done on the bench

Connect the Keytool and the phone via Bluetooth

Vvdi key tool is gonna copy the chip

Search the result

Put KEY TOOL antenna close to ignition switch

collect data:

if the original key is not a smart one, insert the original key, turn on ignition, then turn off, put out the original key

repeat the procedures above until sniffer data complete.

if the original key is a smart one, take out the battery of the original key, then put it close to the coil detection area and light up cluster, turn off the ignition switch, move away the original key

repeat the procedures above until sniffer data complete.

Successfully collected data

Put the original key into the KEY TOOL coil, then upload data

Calculating…need 1.5 minutes around

Don’t move the original key

Verify the original key

The last calculation success

Verify the original key

Read id48 successfully

Put the new key (chip) into the coil, and Keytool app writes data into it

Copy id48 successfully

Test the new key

It’s working


VVDI key tool is verified to copy id48 96 bit without any issue!