Condor XC-Dolphin
How to Fill Code for 2006 Chevrolet Silverado GM39?
Here are two methods to fill code for 2006 Chevrolet Silverado GM39. Case: The car door is missing three cuts including 1, 2 and 10. We can do a code fill. Method 1: by Xhorse Dolphin XP005/XP005L Select Vehicle database>> Chevrolet>> Silverado>> 2000-2006>> GM39 It automatically loads the correct key profile It lost first, 2, […]
HU162T 8-Cut 9-Cut 10-Cut Add Key All Keys Lost by Xhorse Key Cutting Machine
This tutorial provides a step-by-step guide on preparing and using the Xhorse Key Cutting Machine for adding keys and handling all key lost scenarios for HU162T 8-cut, 9-cut, and 10-cut keys. This guide applies to machines like Dolphin XP005L, Condor XC-MINI Plus II, and others. 1.Distinguishing HU162T Key Types HU162T 8-Cut: Features: 1 fixed side […]
How to Choose M5 Clamp Option on Dolphin XP005?
One customer gave feedback that he wanted to use Xhorse Dolphin XP005 Key Cutting Machine to cut a Nissan NSN14 key, but he didn’t get a choice to pick M5 Clamp. Xhorsetool.com engineer offers the menu path as follows. Device Info>> Machine Parameter>> Clamp Calibration>> M1 Clamp/M2 Clamp/M5 Clamp Tech support: Email: Sales@xhorseTool.com Skype: VVDI2shop.com Whatsapp: +8613343421783 www.xhorsetool.com
How to Check Battery Info of Dolphin XP005L?
Customer problem: I used Dolphin XP005L to work with VVDI Key Tool Max Pro, but I couldn’t charge XP005L as the charging didn’t work. Here is the suggestion of Xhorsetool.com engineer. Please check the battery info and send it to us to confirm the result. Two methods to check battery info: Method 1: Connect Key […]
2023 Xhorse Dolphin XP005L Common Problems and Solutions
Here have collected some new common problems and solutions about Xhorse Dolphin XP005L Automatic Key Cutting machine. Main contents: Error Code 22 and 36 Error Code: 6 Detected cutter Security Code Invalid Display Wrong Time after Reset 1. Xhorse Dolphin Machine Error Code 22 and 36: Use Xhorse Dolphin key cutting machine and VVDI Key Tool […]
Xhorse Dolphin XP005L Error code 43 / 28 / 5 / 3 Solution
Xhorse Dolphin XP005L Cut a Honda Key appearing error code: 43, 28, 5, 3 before cutting: Reason: Customer put the key in the opposite direction Solution: Put the key blank on XP-005L in the right direction, and clean the iron scrap after cutting. The problem will be solved.
How to Get Factory Key Code with Xhorse Dolphin XP005L?
One customer gave feedback that he could get the bitting from the key by decoding with Xhorse Dolphin XP005L key cutting machine, but he didn’t know how to obtain the actual factory key code for a key once decoded by the machine. This problem has been resolved now. If you have the same problem, follow the solution below to […]
How to Cut Plastic/Aluminium Key by Xhorse Dolphin XP-005L?
One customer gave feedback that he wanted to use Xhorse Dolphin XP005L to cut Plastic/Aluminium key, and he found instruction on Google, but he didn’t see the option ‘Plastic/Aluminium key cutting’ in his key cutting machine. So he asks for help to cut the key. Some users share their related suggestions below. Suggestion 1: First use […]
Four Steps to Calibrate Xhorse Dolphin XP-008 in 3 Minutes
In the last post, we have introduced Xhorse Dolphin XP008 Mini mechanial key cutting machine which is special for Bit/Pump and Safe Deposit Box Keys. Today we’ll share how to calibrate it in four steps for the first time to use. Easy and fast, only 3 minutes! Step 1. Install the calibration plate Turn off the power of Dolphin […]
(Solved) Dolphin XP005 Cutting Key Calibration is Not Good
Problem: Sometimes, power on the Dolphin XP005 key cutting machine to use, but the cutting key calibration seems is not good, just like the figures below. The possible cause: The sensor is broken. Solution: Use an epoxy to back sensor to the original position and it works. Customer feedback: The problem is sensor […]
Xhorse Dolphin Key Cutting Machine Calibration Guide
Does it need to calibrate every time when using Xhorse key cutting machine? Or just calibrate at the first time to use? Some new users still are not clear about this. Read this post and hope it helps you! Question: So rookie question on the Dolphin. When change adapters, going from internal cut keys to edge […]
