VVDI2 6.1.0 Update Tips & Guides

Xhorse VVDI2 6.1.0 update tips and guides:

1. Fully uninstall then install again,you may need to turn off driver signatures
2. Pulled the sub cable in and out A couple of times changed ports too , it worked
3. Also check the firmware is up to date

4. you need to update the computer software, your firmware on vvdi2 device is 6.1.0 but u most likely need to update software on computer , or if you did that first start the updater and after that plug in thw vvdi2 device

5. Updated driver

6. Check if your driver is installed correctly or not. It should result from the driver installation!

This is for the error message below:
Not found device
Error – Cannot find vvdi2, reconnect VVDI2 and try again!

How to update VVDI2 to version 6.1.0 successfully (no errors)

Here are my experience of Xhorse VVDI2 6.1.0 update


Just updated vvdi2 too version 6.1.
When I open it says v6.0
Transponder programmer can’t find device.


The download link i used:



Have updated the firmware 1.5


Check the file in C: and delete the short cut for old version




Delete all vvdi2 files and re install the software

Cheers, on vvdi2 v6.1.0 now

VVDI2 Software & Firmware 6.1.0 Update

(01-2019) vvdi2 6.1.0 update review with how-to’s: (thanks to Luis Villegas)

I just did the Vvdi2 version 6.1.0 update (software and firmware) and went fine


only thing I did different was saves as In DESKTOP once download it I close all the windows and ran the installation and overwrite all the old files

I remember it took s while. But mine its working. I just need to learn how to use  also i recall it was not detecting the VVDI2 i had to restart. But yes definitely install.

i updated on the VVDI2 program and selected link 1

Firmware update by the upgrade kit and Software i did by mega


Free download VVDI2-Configuration FileV100 .exe


Free download Upgrade Kit


Free download VVDI2 6.1.0 software:


Vvdi2 version 6.1.0 released notes:


*** 2018-01-07

*** Require firmware V6.1.0

===== VAG V6.1.0 =====

  1. Immoprovement for MQB prepare dealer key

a). Support change MQB key ID(support GEKO online),require use VVDI proximity remote

b). Support save synchronize data when make key with working key

c). Support make dealer key with immo data and synchronize data while all key lost

  1. VW MQB add new type: Dashboard version 0555, 0556
  2. Immoprovement for autodetect VAG immobilizer system
  3. Support some NEC24C32 TFT dashboard
  4. Bugfix

===== BMW V6.1.0 =====

  1. ECU /CAS ISN: Bugfix for change ISN for F series
  2. FEM/BDC make key: Add new version, support car until 2018.11
  3. FEM/BDC backup coding: Add new version, support car until 2018.11
  4. Bugfix for MSV70 read ECU synchronize code(2 Bytes)
  5. Bugfix

===== Porsche V6.1.0 =====

  1. Bugfix

===== PSA V6.1.0 =====

  1. Bugfix

===== Transponder Programmer V6.1.0 =====

  1. Support generate MQB proximity remote: require use vvdi proximity remote and download latest remote database
  2. Improvement for vvdi special transponder
  3. Immobilizer data tool: Euro->BMW->motorcycle add new type
  4. Immobilizer data tool: Euro->Iveco->Daily 93C56 bugfix
  5. Immobilizer data tool: Asia->Isuzu->SX4 TC1762 bugfix
  6. Immobilizer data tool: Asia->SAIC->Roewe750 add new type
  7. Bugfix

===== Copy 48 (96 bits) V6.1.0 =====

  1. Bugfix

===== J2534 V6.1.0 =====

  1. Bugfix

===== Online Upate Tool V6.1.0 =====

  1. Bugfix

===== Quick Start V6.1.0 =====

  1. Bugfix


Source: https://www.facebook.com/groups/xhorsetools/