VVDI2 BMW Full Configuration

VVDI2 with BMW full activation:

http://www.xhorsetool.com/wholesale/vvdi2-with-full-bmw-function.html

1) VB-01 BMW OBD

2) VB-02 BMW CAS4

3) VB-03 BMW FEM/BDC

4) VK-01 Transponder Programmer

5) VJ-01 Passthru J2534

 

VVDI2 can be used on : 

EWS 1, EWS 2, EWS 3, EWS 4

CAS 1, CAS 2, CAS 3, CAS 3+, CAS 4, CAS 4+

VVDI2 BMW abilities:

VVDI2 on CAS1/CAS2/CAS3/CAS3+:

Key cutting code: Key This code can help make the key stick, you can use CONDOR Automatic Key Cutting Machine make the key stick directly (Lost All Key is very convenient, no need change cylinder)

CAS remote control frequency: You need select correct remote key accord this value, they must have same frequency. Of course you can test working key frequency with Remote Frequency Test( “F” button on VVDI2 device)

u CAS key in ignition switch is: The position at immobilizer for ignition key. Another way is read key ID with VVDI2 – Transponder Programmer HITAG2 type, compare the key ID with IDs in key info

Get Key Info: OBD read key cutting code, CAS remote control frequency, CAS key in ignition switch is, key info etc. You must read and backup original key info before OBD prepare key

Save Key Info: Save the key info read by OBDII, the file is encrypted

u Load Key Info: Load key info read by VVDI2-BMW, you can write this key info to CAS system by OBD

u Write Key Info: Write the loaded key info to CAS system, it can use for restore original key info

u Prepare dealer key with programmer: After read key info success, select a key position, prepare dealer key with VVDI2 programmer

u Prepare dealer key with ignition switch: After read key info success, select a key position, prepare dealer key with ignition switch

u Add Key: Add the new prepared key to CAS system. Most of the car, the new prepared key can start engine directly without add key; there’s still a few car can’t identification new key, at this situation you need add key to CAS system, key should be placed in VVDI2 programmer

u Program Key Info: After you read key info or load key info, select a specify key item, run this operation to change detail

Attention: We don’t recommend general user run this operation, the working key will stop work if write error data

u Repair Keyless Key: If the keyless key doesn’t have smart function after start engine. You can try this operation to fix it.

Attention: you must have one un-keyless key and this key can start engine

u Enable Key: Insert a working key to ignition switch, select key position which you want enable, press button Enable Key. If there’s a key for this position, it will start work again. Attention: Enable Key don’t need to read key info

u Disable Key: Insert a working key to ignition switch, select key position which you want disable, press button Disable Key. If there’s a key for this position, it will stop work, add key new at this position is also not work. Attention: Disable Key don’t need to read key info

u Clear DTC: Clear the DTCs in CAS system

u Clear Shadow: Clear the Shadows in CAS system

 

VVDI2 on CAS4:

BMW F-Series cars with CAS4 system don’t support prepare dealer key by OBD. You need use File Make Key function to load the CAS4 EEPROM dump (BIN file). You’d better read this with “VVDI – PROG” (one BDM programmer)

u Current key in ignition switch is: The position at immobilizer for nearby ignition key. Another way is read key ID with VVDI2 – Transponder Programmer HITAG Pro type, compare the key ID with IDs in key info u Get Key Info: OBD read key current key in ignition switch is, read all key ID and status (enable or disable).

Note: This operation cannot read immo data

u Enable Key: Insert a working key to ignition switch, select key position which you want enable, press button Enable Key. If there’s a key for this position, it will start work again

u Disable Key: Insert a working key to ignition switch, select key position which you want disable, press button Disable Key. If there’s a key for this position, it will stop work, add key new at this position is also not work

 

Conclusion:

CAS1/CAS2/CAS3 make dealer key by OBDII : works

CAS3+ not encrypt version make dealer key by OBDII: works

CAS3+ encrypt version (include ISTAP) make dealer key by OBDII: works

CAS4/CAS4+ make dealer key by OBDII : will be available

VVDI2 BMW reviews:

  1. i did yesterday CAS1 bmw read eeprom by obd and got key info and cutting code
  2. vvdi2 bmw can make key in bmw ews direct by obd or need read ews dump by programmer then make key
  3. i have a vvdi2 with vag and bmw authorization

have to programmed new keys in bmw (bmw e90 2008 USA year), without keyless go

in original key inside transponder pcf7953 315mhz

My hint for you: Chinese keys work only transponder but remote need to remove cas and do it on bench on tango or xhorse vvdi, but obd method need always original for better chance chip is 7945 or 7953 which is 46 family good luck

…..

source: http://blog.xhorsetool.com/vvdi2-bmw-reviews-2/

 

VVDI2 BMW user manual:

link: http://www.xhorsetool.com/upload/pro/19080715651591411315.pdf

content

  1. Document Declaration
  2. Overview

2.1. Noun explanation

2.2. Options

2.3. EEPROM/KM/Synchronization Codes (OBD)

2.4. Key Learn

2.5. File Make Key

2.6. Unlock Key

2.7. File Change KM

2.8. CAS Repair

2.9. CAS PLUG

  1. Options

3.1. Language

  1. EEPROM/KM/Synchronization Codes (OBD)
  2. Key Learn

5.1. Overview

5.1.1. CAS1/CAS2/CAS3/CAS3+ Function

5.1.2. CAS4 Function

5.2. Special note in OBD operation (Important!!!)

5.3. CAS1/CAS2/CAS3 make dealer key by OBDII

5.4. CAS3+ not encrypt version make dealer key by OBDII

5.5. CAS3+ encrypt version (include ISTAP) make dealer key by OBDII

5.5.1. Add new key with working key

5.5.2. Lost All Key

  1. File Make Key

6.1. Special note in File Make Key (Important!!!)

6.2. EWS1/EWS2/EWS3/EWS4/CAS1/CAS2/CAS3 (include lost all key) .

6.3. CAS3+ (include lost all key)

6.4. CAS4 (CAS4+) (include lost all key)

  1. Unlock Key
  2. File Change KM
  3. CAS Repair

9.1. CAS1 (0K50E) OBDII Repair

9.2. ISTA-P4* OBDII Repair

  1. CAS PLUG

10.1. CAS PLUG Overview .

10.2. Make old CAS PLUG work on VVDI2

10.3. CAS PLUG connect to EWS/CAS

10.4. Manual line to achieve CAS PLUG

 

VVDI BMW – Questions and Answers

 

Here are questions and answers  of the new Xhorse VVDI for BMW.

Hope it helps.

 

Is vvdi bmw released yet?

Released. will be available in the market soon

 

What does the VVDI BMW do that the VVDI2 to does not?

It has functions of coding and programming and much more

 

What’s the difference? vvdi bmw and vvdi2 bmw

Vvdi for bmw has possibility for coding and changing cars vo and retrofit options.

 

Coding and programming enabled?

vvdi bmw not only for locksmith, but it has functions of coding and programming and much more (such as change vehicle order and emergency flash and manual coding ….)

 

When is possible to order? and Where to?

Very soon. Here you go: http://www.xhorsetool.com/wholesale/vvdi-bmw-key-programmer.html

 

 

VVDI BMW price please.

aound 999$ if you have no vvdi2 and about 666$ if you have vvdi2

 

Easy to use?

For people who already is familiar with Bmw this tool is a mix of of Esys and Vvdi. Very easy, very powerful and quite useful.

 

Send me info on how to buy please

http://www.xhorsetool.com/wholesale/vvdi-bmw-key-programmer.html

 

VVDI BMW vs. VVDI2 BMW

Will vvdi bmw all the function of this also come on the vvdi2?
 and what’s the difference between vvdi bmw and vvdi2 bmw side?
The answer is:
vvdi bmw only for coding and programming
not like vvdi2
vvid2 could be use as hardware but for later will have special hardware

1. able to program  E chassis/F chassis
2. able to do coding on E chassis / F chassis
3. able to OBD  program new keys to CAS1/CAS2/CAS3/CAS3+/ISTAP/ etc.
4. able to generate key file for CAS1/CAS2/CAS3/CAS3+/ISTAP/CAS4/CAs4+, etc.
5. able to work for FEM/BDC: generate FEM/BDC keys, replace the FEM/BDC control unit, change FEM/BDC mileage
6. able to do odometer correction for CAS1/CAS2/CAS3/CAS3+/ISTAP/CAS4/CAs4+
7. able to read EEPROM and sync data for CAS1/CAS2/CAS3/CAS3 systems
8. able to work for simultaneous engine and CAS, synchronous ELV and CAS
9. able to read SN data from the engine

10. able to do diagnostic tests and ECU programming

VVDI2 BMW: http://www.xhorsetool.com/wholesale/vvdi2-with-full-bmw-function.html

1) VB-01 BMW OBD: activated!
2) VB-02 BMW CAS4: activated!
3) VB-03 BMW FEM/BDC: activated!
4) VK-01 Transponder Programmer: activated!
5) VJ-01 Passthru J2534: activated!