Xhorse Condor Dolphin key cutting machine
How to Solve Dolphin XP005L Cannot Cut Short Keys?
Customer problem: I need to cut short keys with the Xhorse Dolphin XP-005L, but it does not seem to have this capability. Xhorsetool.com engineer replied: You can cut one side with the M4 clamp and then the other side. Clamp M4 (also Jaw M4) is designed for household keys – mainly supporting standard single and double-sided keys, and also for crucifix keys. It can be used with Dolphin XP005/XP005L, Condor XC Mini Plus/Plus II […]
Xhorse Dolphin XP005 and Key Tool Max Cut Toyota/Lexus 80K Key
How to use Xhorse Dolphin XP005 Key Cutting Machine and VVDI Key Tool Max Pro (Key Tool Max) to cut Toyota /Lexus 80K series key (all keys lost)? It can be done working with an Xhorse Toyota XM Smart Key and a special adapter. Step 1: Get key code Generally, the key code can be […]
How to Solve Dolphin XP005L M5 Clamp Can’t Move Problem?
Problem: I wanted to remove the M5 clamp on my dolphin xp005l key cutting machine, but no matter how I rotated the handle, the clamp wouldn’t move at all. The solution: Please try to solve it with the following method. 1.Rotate this handle to remove the clamp 2.The issue is not about removal but the […]
Xhorse Dolphin XP005 Update Review
Today I do an update to my dolphin xp005 with the Xhorse upgrade kit software showing how easy it is… A windows based PC is REQUIRED. I have it installed already & have for over 3 years. I did a key cut right after I did the calibration because a customer walked in and needed a duplicate. […]
Xhorse Dolphin XP005 Decode an Already Cut Key on Mazda 3 CX-9
Decode an already cut key on 2010 Mazda 3 CX-9 with Xhorse Dolphin XP005 and VVDI Key Tool Max Pro no issues. Why to decode an already cut key? It’s nice to check it against the codes to see if it’s reading correctly. If someone needs a duplicate of their key and it’s worn down, I always check […]
Ford Focus Advanced Cut Fill with Xhorse Dolphin XP005/XP005L
How to get the factory key code in advanced cut fill progress with Xhorse Dolphin XP005/XP005L key cutting machine? Here takes Ford Focus FO38R as an example. Select vehicle database>> Ford>> Fusion>> FO38R (8 bitting) Got the key code from a part of door cylinder, it’s 212113?? The last two digits were missing. Input the first 6 bittings, […]
How to Solve Dolphin XP005L Cut Kia Key is Shorter than Original?
Customer problem: I used the dolphin xp005l to cut a Kia key, but after cutting, the new key groove was shorter than the working key. What I did was as follows: Tapped Vehicle database, selected Kia/Ceed, 2007-2010, KK10, followed the instruction to put the blank key on M5 clamp, and started to cut key. Xhorsetool.com engineer replied: Select [Universal Key Duplication] to […]
2014 Ford Fusion Simple Code Fill with Dolphin XP005/XP005L
One customer lost his 2014 Ford Fusion keys, and he wanted to get the factory key code to cut new keys. He picked up the car door and got the bitting, but the first cut was missing. He knew it was HU101, so he tried to find bitting by Xhorse Dolphin XP005L with Key Tool […]
How to Replace Xhorse Dolphin XP-005L Touch Screen?
If the touch screen of Xhorse Dolphin XP005L key cutting machine cannot turn on, you’d better take apart the screen to check if the cables are loose. If the problem cannot be solved, please change a new screen. Steps to replace Dolphin XP005L touch screen: Step 1: Remove the back case and handle Remove all […]
Xhorse Dolphin XP005L with M5 Clamp Cut Lexus Keys Error Solution
I used Xhorse Dolphin XP005L to cut Lexus keys. When I was using the M5 clamp, on the B side, whenever I tightened the clamp, the key lifted out of the clamp. I put the key in between those four raised areas, and I noticed these raised areas on the clamp too. I was not […]
How to Solve Xhorse Dolphin XP005/XP005L Error Code 42?
Customer problem: I use my new Dolphin XP005L and key tool max pro to cut Hon66. It is already calibrated. When I send the order to cut, it reaches 1%, the red light comes on and prompts “error code 42”. I already tried another cutter and tried, but the error still exists. Here is the suggestion: Step 1: […]
