VVDI Prog 4.8.1 download for D80XX, D160XX, M35080XX, M35160XX (New)

Confirmed! 03.2019 vvdi prog latest version 4.8.1 is able to work with D80XX, D160XX, M35080XX, M35160XX!

Free download vvdi prog 4.8.1:

https://mega.nz/#!PlhQwAxS!LJ1Uq0cutyfP_bfx8jEk7PRL85d7c69nYL7aJszzYso

Password:123456

VVDI Prog 4.8.1 released notes:

NO need update firmware
+ Add VVDI PROG USER MUNUAL 4.8.1 version in Doc folder
+ Add D80XX, D160XX, M35080XX, M35160XX options in <1-EEPROM&FLASH>-><SPECIAL-FUNCTION>
+ Add XF-RFA(2013) options in <4-IMMOBILIZER>-><JAGUAR>
+ Add CX70(2018) options in <4-IMMOBILIZER>-><CHANGAN>
+ Add KARRY(2015) options in <5-DASHBOARD>-><CHERY>
+ Add BJ20(2016) options in <5-DASHBOARD>-><BAICMOTOR>
+ Add EQUINOX(2018) options in <7-AIRBAG>-><CHEVROLET>

Steps to read and write 35160xx:

Important: you should have a 35160dw chip

Tips and guides: How to use 35160dw chip for odometer correction with VVDI prog

in detail…

Step 1. Backup data

Read and Save the dashboard original IC from 3 partitions(MEMORY+LONGID+ID LOCATION) or
ALL option (ALL=MEMORY+LONGID+ID LOCATION), shown as sample picture

Step 2. Write data

After replace original chip by Xhorse 35160xx chip, please write step1 saved 3 dumps to each partition on xhorse chip by VVDI PROG.

Step 3. Mileage correction

‘Erase INC’ button is for erasing the front 2 lines, after erase INC operation then select ALL or MEMORY option to Read data for verify, Reading data the front
2 lines should all ‘00’, manually enter the targert mileage, then click Write option, operation completed.

Step 4. Verify data

Soldering back the Xhorse chip to dashboard, check whether working well without red dot.

VVDI PROG 4.8.0 Download + Release Notes

 (28-02-2019) Xhorse VVDI PROG latest software version V4.8.0 updated!
Download link:

Password:123456

Release notes: vvdi prog v4.8.0
* This version DOESN’t require firmware update
+ Add VVDI PROG USER MUNUAL 4.8.0 version in Doc folder

+ Add 25AA010, 25AA020, 25AA040, 25AA080, 25AA128, 25AA160A, 25AA160B, 25AA256, 25AA320,25AA640, 25LC160A, 25LC160B,
25LC1024 options in <1-EEPROM&FLASH>-><MICROCHIP>
+ Add 25AA010(CLIP), 25AA020(CLIP), 25AA040(CLIP), 25AA080(CLIP), 25AA128(CLIP), 25AA160A(CLIP),25AA160B(CLIP), 25AA256(CLIP),
25AA320(CLIP), 25AA640(CLIP), 25LC160A(CLIP), 25LC160B(CLIP), 25LC1024(CLIP) options in <1-EEPROM&FLASH>-><MICROCHIP(CLIP)>
+ Add MB91F534B options in <2-MCU>-><FUJITSU-MB9XF>
+ Add MC9S12XS64_SECURED, MC9S12XS128_SECURED, MC9S12XS256_SECURED options in <2-MCU>-><MOTOROLA-MC9S12>
+ Add R7F701071 options in <2-MCU>-><RENESAS-RH850>
+ Add F_ENGINE_MEVD1723(F20)EEPROM options in <3-ECU>-><BMW>

+ Add F_ENGINE_MEVD172K(F20)EEPROM options in <3-ECU>-><BMW>Tech support: xhorsetool.com

VVDI Prog Updated in 10.2018 – What’s New?

Xhorse vvdi prog is updated to version 4.7.5 in Oct., 2018. So what’s new?

Here you go

vvdi prog 4.7.5 released notes:

* vvdi-prog sw 4.7.5 doesn’t require firmware update
* Fix some bugs

+ Add VVDI PROG USER MUNUAL 4.7.5 version in Doc folder
+ 93LC46, RA57, RA66, RA76, RH86, RL56 options in<1-EEPROM&FLASH>-><*OTHER>
+ Add NEW-BENBEN-BODY-COMPUTE(2015) option in <4-IMMOBILIZER>->
+ Add DAMAI-X5-BODY-COMPUTER(2015) option in <4-IMMOBILIZER>->
+ Add NEW-BENBEN(2015) option in <5-DASHBOARD>->
+ Add BAOJUN(2017) option in <5-DASHBOARD>->
+ Add CHASSIS-205-POST-SAM-COMPUTER (2014) option in <8-OTHER>->
+ Add 730-VEHICLE-HEIGHT-CONTROL (2007) option in <8-OTHER>->
+ Add 730-TAIL-GATE-CONTROLLER (2007) option in <8-OTHER>->
+ Add 730-REVERSING-RADAR-COMPUTER (2007) option in <8-OTHER>->
+ Add CHEROKEE-ELECTRONIC-TAILGATE (2014) option in <8-OTHER>->
+ Add V5-REACHCTRL-POWER option in <8-OTHER>->
+ Add V5-ELV option in <8-OTHER>->

vvdi prog 4.7.5 download link:

https://mega.nz/#!YY8VVSgT!XFSTmEHUaWCub6IXMGnCP9xJmnH9dEnJe0ZSMGD-vOk

password: 123456