VAG MQB Odometer Correction with Iscancar VAG MM-007

Another new tool can be used for VAG MQB – Xhorse Iscancar VAG MM-007

Note that you have to use software v2.3.3 for MQB odometer correction

Iscancar VAG MM-007 MQB dashboard car list:
    Audi A3/S3 2014+
    Audi Q2
    VW Golf7
    VW Polo(MQB)
    VW Tiguan II
    VW Touran II
    VW crafter 2017+
    VW Passat B8 without virtual cockpit
    Skoda Octavia III 2014.07+
    Skoda Rapid 2015.06+
    Skoda Kodiaq
    Skoda Superb III
    Seat Ibiza/Ateca/Toledo 2015.06+
Note:
1: This type only support cars with cluster Continental/VDO. JCI type and virtual cockpit was not included.
2: please use upgrade kit, select 2.2.3 version firmware to update.
Important:
1.PQ35 gateway 7N0907530AN: active MKE. after writing data record, you can set MKE on dashboard.
2.MQB gateway 5Q0907530AJ: active MKE. after writing data record, you can set MKE on dashboard.
3.PQ35 replace kessy 5K0959434B: before writing data, there’s a DTC “no basic setting”, the car can’t find keys. After writing data the DTC disappear, the car can find keys.
4.MQB replace kessy 5Q0959435A: before writing data, there’s a DTC 10478040(invalid data record), the car can’t find keys. After writing data the DTC disappear, the car can find keys.
5.MQB front camera 5Q0980653G: before writing data, there’s a DTC 0649 (invalid data record), after writing data the DTC disappear.
6.MQB new ACC 5Q0907561A: before writing data, there’s a DTC” invalid data record”, after writing data the DTC disappear.
7.PQ Xenon 5M0907273F: before writing data, there’s a DTC 10478040 (invalid data record), after writing data the DTC disappear.
8.PQ tire pressure monitor 3AA907273D: before writing data, there’s a DTC 12652550 (invalid data record), the controller don’t work, after writing data the DTC disappear, you can set tire pressure on the dashboard.
9.MQB new DCC 5Q0907376: before writing date, there’s a DTC 813056 (invalid data record), after writing data the DTC disappear.
10.MQB parking assistance 5Q0919298K: before writing data, there’s a DTC 10478040 (invalid data record), after writing data the DTC disappear.
……
Other options of MQB immo & dash:
1: VVDI2 VAG MQB Immobilizer & dashboard: confirmed!
2: Obdstar tools (X300M, key master…) MQB dashboard: confirmed!

Xhorse New Item: VAG scan tool VW

Xhorse released a hand-held VAG scan tool VW for diagnostics and maintenance:  Iscancar VAG MM-007. Here you go.

the package:

packed well with two box, one paper box, and one plastic box

items includes Xhorse Iscancar VAG MM-007 main unit with an OBDII connector, and a USB cable used for connection to PC

the main unit

specification:

Voltage: 5V USB / 12V OBD
LCD resolution: 320×240
USB standard: USB2.0
Working temperature: 0-60°C
OBD line length: 1.5meters
Power consumption: 80mA/12V

the port

the back, saying it supports J2534 SAE, J1850 PWM/VPW, ISO 14230-4 (KWP),  ISO 15764-4 (11 bit and 29 bit CAN), ISO 9141-2

Xhorse Iscancar VAG MM-007 main menu:

vag diagnostics

guide function

parameter refresh

special function

controller refresh

system setup

about iscancar

about Xhorse Iscancar VAG MM-007:

firmware version: 1.0.0

software version: 2.1.6

languages: only Chinese and English available

VAG diagnostics…Here you go

systems that is supported

guide function :

parameter refresh:

special function that Xhorse Iscancar VAG MM-007 can do:

change vin
read pin
immo switch
adapt unit module
key learning
fix Audi RB4/RB8 not start
transport mode
sync dashboard time
clear all DTCs
gateway register

controller refresh:

firmware refresh

parameter refresh

system setup:

time and date
log record
display time
set language
scan QC code
firmware update
set WSC code
TF card formate & create folders

For more details, please go to http://www.xhorsetool.com/wholesale/xhorse-iscancar-vag-mm-007-diagnostic-and-maintenance-tool.html