VVDI2 Full Kit vs. VVDI2 Full Authorization

Look here: vvdi2 full kit and vvdi2 full configuration difference

it’s different. the full kit doesn’t cover full authorization

In detail…look at the chart below:

Cars and Authorization VVDI2 Full Kit VVDI2 Full Authorization
5th AUDI Authorization
BMW OBD Authorization
BMW CAS4 + Authorization
BMW FEM/BDC Functions x
Copy 48 Transponder by OBDII x
Copy 48 96 bit Transponder and MQB function x
Toyota H chip x

That is, the full kit doesn’t cover 48 copy, 96bit 48 copy, mqb function and fem/bdc, toyota h chip function.

VVDI2 basic: http://www.xhorsetool.com/wholesale/vvdi2-commander.html

VVDI full kit: http://www.xhorsetool.com/wholesale/vvdi2-full-version.html

VVDI2 full authorization: http://www.xhorsetool.com/wholesale/xhorse-vvdi2-key-programmer-all-functions.html


Join the Xhorse group: https://www.facebook.com/groups/xhorsetools/

Best price via PM

VVDI2 Configuration File v1.0.0 Download for VVDI2 Update

For Xhorse VVDI2 owners:

This is a problem and solution of VVDI2 software update failed because of old version of VVDI2 database file


Problem from a VVDI2 owner:

When the user updated VVDI2 Full Kit to the latest version, the system popped up the error in VVDI2 BMW V5.2.1:

Attention: VVDI2 database file released newest version: V1.0.0. Please update your software with VVDI2-Update Tool

VVDI2 database file lower version may cause some function failed. WE STRONGLY SUGGEST YOU UPDATE TO LATEST database file!

Solution from the Xhorse:

VVDI2 configuration file download link:


Download VVDI2 Configuration file v100, then install

Note that the tool is not included in VVDI2 software download

Tech support from XHORSETOOL.COM

How to: VVDI2 program key to BMW E87 2006 (CAS2)

Purpose: add a key to 2006 BMW E87


Tool: brand new VVDI2 full kit


Car: a 2006, 1 series, E87, with CAS2


Problems: I connected the VVDI2 to the OBD2 port, inserted the already existing key into the key slot, turned ignition on and clicked Connect on my VVDI2 4.7.0 app. I was surprised to get “AutoDetect Failed!” error so I checked connections and clicked Connect again, same error. Than I taught maybe it is not able to detect the CAS, no big deal, so I selected the “OBD2 KWP-E6X,E9X……..” and clicked Connect again, this time it was “Reading Data Failed!“, and so on for every protocol that I’ve selected. Than I went ahead and undated the software and firmware to version 4.7.5 that is the last version, but no change.



Long story short my VVDI2 can’t connect to CAS2


Solution: Checked and works. Even with last ftdi drivers. You have to check that drivers DON’T LOAD VCP DRIVER.


Attach photos

I made my own cable. I’ll upload photos of the pinouts, that way you can check your cable!