Here have collected some customer feedback about Xhorse Multi-prog Programmer.
Check the details below.
1.Xhorse Multi Prog read Renault SID301 MCU via BDM- Success
Need MCU Adapter Multi-PROG Solder Cable (in the multi-prog package)
Read chip data and verified OK
Read EXT EEPROM (M95320) data takes 28s 842s
Read EXT FLASH (S29CD016G1) data takes 8 min 32s 998ms
2.Multi Prog VAG EDC16U34 ECU IMMO OFF Script on bench- Success
Go to Script>> Released features function and select the corresponding VAG EDC16 option to run script
Read EXT EEPROM OK by clicking “R-PROG”
Immo OFF, checksum OK by clicking “IMMO”
Write raw data success
The whole process takes about 2 mins
3.Multi-Prog VAG EDC16U34 ECU R/W by bench- Success
Read EXT EEPROM ok. Take 40s 356ms
Read EXT Flash ok. Take 2min 14s 77ms
Read INT Flash failed. Because the EDC16U34 ECU is based on what the MPC have or don’t have the internal flash.
Save EXT EEPROM and EXT Flash data after reading- success
Click [Verify] to write the data for calculating the checksum online.
Checksum calculation is successful.
Write operation takes 1min 14s 220ms
4.Multi-Prog Programmer read/write VAG EDC17CP44 on bench- Success
Read INT EEPROM ok. Take 3min 11s 670ms
Read INT Flash ok. Take 5min 10s 689ms
Write INT Flash ok. Take 3min 27s 611ms
