35160DW chip does NOT cover 35128WT

Fyi, the Xhorse 35160dw chip now supports M35080, M35080-3, M35080-6, M35080V6, M35080VP, D80D0WQ, 160D0WQ, 36160WT but CANNOT cover 35128WT (but will cover 35128 in the near future)

Hextag reading 2kb that’s the problem.
35128WT should have 16kb – it’s 8 times bigger.
I tried allredy read it with vvdi with chip soldered to that adapter and error – adapter not connected…
But on the picture under 35128 is 080 adapter

http://blog.xhorsetool.com/how-to-use-35160dw-chip-for-vvdi-prog-readswrites-mileages/  – this option doesn’t work.
Reads only 2kb instead 16kb.


Tested by Tom Kedra from https://www.facebook.com/groups/xhorsetools/

Confirmed by xhorsetool.com

How to use 35160DW chip for VVDI Prog reads/writes mileages

35160DW chip tips and guides- What you have to know

This is: How to read and write 35080XXX,35160XXX,95XXX odometer with a VVDI Programmer:


you MUST have: a new 35160DW chip for VVDI Prog

source: http://www.xhorsetool.com/wholesale/xhorse-35160dw-chip.html


Reasons for to get the chip:

1.Replaced M35160WT XDPG31CH Adapter

2.Stable and reliable

3.Perfect replacement of original chip

4.Refuse the red dot, no need simulator soldering


XHORSE 35160DW adapter, working together with VVDI Prog, can fix the red dot without emulator,
it can perform as the same stable and reliable as the original one.

This VVDI Prog 35160DW chip is for the new BMW.
If you use the current market equipment to adjust the mileage, the meter will display a red dot.
What is the support for replacing the following chip? It is a chip that is specially used for this chip.



35160dw chip now supports M35080, M35080-3, M35080-6, M35080V6, M35080VP, D80D0WQ, 160D0WQ,36160WT but doesn’t cover 35128WT (but will cover 35128 in the near future)



directly solder the 35160dw chip on the board with 8 pin from the vvdi prog  standard package





Step 1. read and backup data of 3 areas (memory, LONGID, IDLOCATION) from the original dashboard IC

note: have to read and write data with the latest vvdi prog software (will be released soon)


Step 2. write the backup-data to 3 areas on the chip

if the first two lines of the chip need change mileages, pls click on “Erase INC” on the bop right corner and then read out data

if the first two lines display all zeros, manually enter a new mileage for change

directly click on “Write” then done!


Step 3. solder the fixed chip on the dashboard to check if it starts or not, with or without a red dot


The last: the 35160dw chip is NOT re-writable!!!!!!!!!!