How to generate and program 2010 Lexus IS250 new smart remote by VVDI Key Tool Max Pro and Xhorse XSTO01EN Smart Remote Key? Follow the operation guide step by step.
Before operation, connect VVDI Key Tool Max Pro to the vehicle via the OBD cable.
1.Generate new remote with Xhorse XM- TOYO01EN by Key Tool Max Pro
Step 1: Check original remote
Put the original key into the coil of VVDI Key Tool Max Pro
Tap Transponder Clone>> Read>> Edit>> Read
Read out the chip is Toyota keylessgo, 4D 80BITS and password 98
Step 2: Check original frequency
Check the frequency is 433MHz ASK
Step 3: Generate new remote
Put the Xhorse Toyota smart remote to the Key Tool Max Pro coil
Tap Remote Program>> Lexus- LX570 A433 433.92 ASK
Check the PCB number is A433, frequency 433.92 ASK.
Press Generate and it will take about 1- 2 minutes to complete generation
Burn success
Step 4: Check new generated key
Tap Transponder Clone>> Read>> Edit>> Read
Read out the new remote chip is 4D and password 98, same as the original
2.Program new remote with Key Tool Max Pro
Turn ignition on
Tap IMMO Programming>> Lexus>> Select by type>> Smart key system>> Type 1 (4D+ K)>> IMMO programming
Then select Add smart key
Follow the on-screen prompt to operate below:
Turn on the ignition switch and press Confirm to continue
Read the registered key number is 3, press Yes to continue
When it prompts “Hold the programmed key close to the start button and keep it, click OK to continue, just press OK and keep touching the ignition button with a registered key within 30 seconds.
After touching, you can hear 1 beep.
Then put the new remote close to start button and keep touching until sound twice
Program successfully
Put the new remote on the passenger seat
Complete the above operations within 30 seconds
Key programming is completed
3.Test new remote programmed
Test the new remote function, all buttons work well
Put the new remote Xhorse TOY-T universal Smart key into key shell, and use it to start the car, works perfectly
Alright! That’s whole process to generate and program new remote to Lexus IS250 2010 4D by using Xhorse Key Tool Max Pro and XM Smart Remote.
