Recently, some customers gave feedback that the battery of Xhorse Dolphin XP005/ XP005L key cutting machine cannot charge normally. Xhorsetool.com engineer gives the related solution as follows.
Step 1:
Make sure Dolphin XP005/XP005L update to the newest software. After the upgrade is complete, open Xhorse APP to check the battery info.
Go to Device Info>> Key cutting machine>> Power>> Detail
If it shows “No data” on the screen, please go to step 2.
Step 2:
You’d better take photos to ensure that the gear and pins are correct.
1.Select DC power supply gear, please measure the voltage of these two pins of the battery on the picture below and send us the result.
2.Please measure the voltage of these two pins of the main board follow the step below and send us the result.
First, unplug these two cable on the motherboard
Turn the multimeter to this setting (Diodegear)
Measure the volts of these two pins, and take me a photo like this
and measure these other two pins value
(Note the color of the meter pens in the diagram)
Tech support:
Email: Sales@xhorseTool.com
Skype: VVDI2shop.com
Whatsapp: +8613343421783