Multi Prog Tag Archive
How to Solve Multi Prog Update Firmware “Jump Recovery Error 41330004”?
Reported Problem: A user recently installed Xhorse Multi Prog on his PC but ran into trouble when trying to update the firmware from version 1.36 to 1.45. The upgrade failed with the error: “Jump Recovery error: Error code: 41330004 fails to communication with the SC chip.” Recommended Solution: You can attempt a forced firmware upgrade […]
Xhorsetool.com XMAS Sale: Up to 50% Off
Don’t miss the Xhorsetool.com XMAS Sale! For a limited time only (December 9th – 18th, 2025), discover unbeatable discounts on the original Xhorse tools, including: VVDI Prog Programmer VVDI Key Programmer VVDI Key Tool VVDI MB Tool Key Cutting Machine VVDI Remote Save up to 50%—this is your chance to save big! Shop now: https://www.xhorsetool.com/producttags/big-sale.html […]
How to Solve Xhorse Multi Prog Read and Write Button Grey Out
One customer gave feedback that the “Read” and “Write” buttons in the Multi Prog software were grey, and he couldn’t click on them. He tried on a different PC, but also appeared the same problem. Xhorsetool.com engineer offered the solution below: The latest software update added a new “Connect” button in the menu. You need […]
How to Solve Multi-Prog ME7.1 ECU “Chip Power Configuration Failed”?
Problem: When attempting to read a VW ME7.2 ECU using the Xhorse Multi-Prog Programmer in bench mode, the software displays the error message: “Chip Power Configuration Failed.” Xhorsetool.com engineer replied: This issue is typically related to an incorrect power supply voltage. The ME7.2 ECU requires a 12V power supply. If you’re using a 15V power […]
How to Solve Xhorse Multi Prog “WiFi Module Not Inserted”?
Here is the solution for “WIFI Module Not Inserted” Error on Xhorse Multi Prog Programmer. The solution: This device supports built-in Wi-Fi connectivity. A USB Wi-Fi network adapter is included in the package.To enable Wi-Fi: Insert the USB Wi-Fi adapter into the port on the back of the machine. Power on the Multi-Prog The […]
How to Solve Xhorse Multi Prog Server Calculation Error (FFFF000C)?
Problem: When attempting to read a VAG SID10.4 ECU using the Xhorse Multi Prog, the operation fails and displays the error: “Server Calculation Error FFFF000C” The Solution: Check Your Network Connection Ensure you have a stable and active internet connection. A poor connection can prevent communication with the Xhorse server. Check Server Status The error […]
How to Solve Xhorse Multi Prog “Remaining Usage of the Device” Error?
One customer gave feedback that his Xhorse Multi-Prog Programmer appeared an error “The remaining usage of the device is less than 50 times.” Xhorsetool.com engineer offered the solution below: After using the Multi Prog for 1000 times, you need to synchronize the device again. Select Update Online >> Authorization management Sync device. Then the problem […]
Xhorse Multi Prog Fixes Audi Radio 24C256 Unit Component Protection
A customer tried to install a used Audi radio unit from eBay, only to be hit with the dreaded Component Protection (CP). Like many, he believed it would be plug-and-play—but reality had other plans. After unsuccessful attempts with various CG programmers and efforts to manually transfer EEPROM data, the solution finally came from Xhorse Multi-Prog […]
Xhorse Multi-Prog Clone Audi A3 (2014-2020) Climate Control Unit
Just wrapped up an interesting job cloning a climate control unit from an Audi A3 (2014, fits 2012-2020 models) and wanted to share the process using the Xhorse Multi-Prog Programmer. This is a great alternative for those without access to expensive tools like ODIS online, and it’s perfect for recycling spare parts from damaged vehicles. […]
Xhorse Multi Prog Renault Master BCM N3 D70F3376A Pinout
Xhorse Multi Prog can support Renault Master BCM N3 D70F3376A reading and writing. Here share the pinout for reference. In the Multi-Prog software, select MCU-Renesas-V850- D70F3376A www.xhorsetool.com
How to Solve Xhorse Multi Prog Read Benz W169 Chip Crack Failed?
If you’re encountering an error while trying to read the Mercedes A-Class W169 EIS/EZS using the Xhorse Multi Prog, with the message “Chip Crack Failed,” don’t worry—there’s a solution. Solution: There are two firmware versions (V1 and V2) for the Mercedes W169 EIS/EZS. Try both models to find the correct one. Adjust the voltage to […]
