Will vvdi bmw all the function of this also come on the vvdi2?
 and what’s the difference between vvdi bmw and vvdi2 bmw side?
Moe replied:
vvdi bmw only for coding and programming
not like vvdi2
vvid2 could be use as hardware but for later will have special hardware

1. able to program  E chassis/F chassis
2. able to do coding on E chassis / F chassis
3. able to OBD  program new keys to CAS1/CAS2/CAS3/CAS3+/ISTAP/ etc.
4. able to generate key file for CAS1/CAS2/CAS3/CAS3+/ISTAP/CAS4/CAs4+, etc.
5. able to work for FEM/BDC: generate FEM/BDC keys, replace the FEM/BDC control unit, change FEM/BDC mileage
6. able to do odometer correction for CAS1/CAS2/CAS3/CAS3+/ISTAP/CAS4/CAs4+
7. able to read EEPROM and sync data for CAS1/CAS2/CAS3/CAS3 systems
8. able to work for simultaneous engine and CAS, synchronous ELV and CAS
9. able to read SN data from the engine

10. able to do diagnostic tests and ECU programming

VVDI2 BMW: http://www.xhorsetool.com/wholesale/vvdi2-with-full-bmw-function.html

1) VB-01 BMW OBD: activated!
2) VB-02 BMW CAS4: activated!
3) VB-03 BMW FEM/BDC: activated!
4) VK-01 Transponder Programmer: activated!
5) VJ-01 Passthru J2534: activated!

VVDI2 for BMW E and F series: What can do? How to?

VVDI2 for BMW E and F series – questions and answers:


All bmw E and F series can be done with vvdi2? 

F series needs to solder etc


F series always worked ?

not always. Have problem with coding back up and car stop starting.


cas3+ ?

30 2013 with fem


Any problem with vvdi2 on E and F series?

The problem is : after adding a new key on CAS3 and CAS3+ you must erase ELV/DME otherwise the car won’t start. …


What you use to erase elv/dme?


Tip: Adding a key on cas3 is like a 3 minute job … Cas3+ just requires a downgrade.