Xhorse Masker Garage Remote can work with VVDI Key Tool Plus, Key Tool Max, Key Tool Max Pro, and Mini Key Tool to switch over 20 frequencies manually. Check the step-by-step guide below.
Step 1: Disassemble Masker Garage Remote key
Remove the cover of the remote key
Tear off the Xhorse logo on the back
Unscrew the screw with a screwdriver
Remove the back cover and take out the PCB of the remote key
The disassembly of the remote key is completed.
Step 2: Change the frequency of Garage Remote Key
Connect Xhorse Key Tool Max Pro and remote key via the wired remote key cable which is provided by Key Tool Max Pro
Turn on Key Tool Max Pro and enter Special Function interface
Select VVDI remote function>> Garage door key customization
Click Read to read the remote control frequency
Read successfully! The frequency is 315MHz and the frequency offset is 055Khz.
Click on Frequency MHz (260~960) value to be modified
Click on Frequency offset KHz (0~200) value to be modified
Note: needs to enter the value within the range it shows
Click Settings to complete the modification
Setup successfully
Click Read again, now the Xhorse Garage Remote Key frequency becomes 433MHz and frequency offset becomes 026Khz.
Done!
