Xhorse Smart Key Box is a newly developed and produced by Xhorse for the aftermarket. It adopts advanced RF technology and is suitable for the car with push start function, and can add smart key for car, add or modify the keyless- enter function. With the unique APP, it can be used to generate remote control with VVDI devices such as VVDI MINI Key Tool, Key Tool Max, Key tool Plus and VVDI2.
The highlights of Xhorse Smart Key Box:
By installing the tool into your car, your smartphone is able to work as an independent car key.
Usually, it inherits all of the functions of your original remote, including lock, unlock, panic and trunk.
Furthermore, keyless entry is also a function that can be performed on your smart phone.
The safety index is higher than the original remote control.
You can perform “Security Settings” on the “Smart Key BOX” APP.
Even if the phone is lost, others cannot open your car.
You can “turn on verification” in the security settings.
Four security verification methods, easy to operate, prevent problems before they happen.
The packing list of Xhorse XDSKE0EN Smart Key Box:
It comes with all goods as below.
- Xhorse Smart Key Box main unit* 1
- LF antenna* 2
- RF antenna* 1
- Power supply cable* 1
- Use manual* 1
- Product quality certificate* 1
Look at the images to learn more details.
The meaning of each remote soldering line:
How to use Xhorse Smart Key Box?
Three steps make your smartphone a car key:
2.Dowload Smart Key Box APP
Method 1: Search for “Smart key box” on Google Play or APP Store and download
Method 2: Scan the following QR code to download directly
The specific installation steps:
Step 1: Take out the original remote control, solder the cable according to the soldering diagram of the original remote control, and pay attention to the direction
Step 2: Connect the RF antenna, LF antenna (connect any two interfaces of LF antenna), and the original remote control to be transferred
Step 3: Find the Vbat wire and ground wire from fuse box, OBD interface or other locations
Step 4: Find the ACC signal line (the original car radio, the line with electricity after the navigation power on or the instrument light on)
Step 5: Connect the Vbat wire, ground wire and ACC wire of the power supply cable to the car
Step 6: Setting DIP switch
Step 7: Bindings of remote control and mobile phone (refer to binding instruction)
Step 8: Install complete
Step 9: After installed, take a key close to the car, test the automatic unlock and lock function if you stay away (test other keys in the same way)
Step 10: Test unlock, lock, trunk and car panic function after connecting with APP.
The Xhorse Smart Key Box is currently available for pre-ordering, please feel free to contact our customer service.