Xhorse VVDI2 Passat User Manual

Xhorse VVDI2 Key Programmer

Written by:

VVDI2 Passat User Manual:

4th immobilizer system

 

VW Passat B6/B7/CC Key Learn

 

You can read PIN and 6 bytes CS from ECU via OBD, no comfort module dump

46 Transponder:

Lost all key is same as add key with working key. Place 7th byte CS to “FF”

48 Transponder:

Add key: you need find 7th byte CS from working key, you can follow steps: 1->2->3->4

Lost all key: this type need use try start method to find working key. Try times belong to 0-255. First try need start from 0, if failed in the procedure, record the failed times. Next time, try start with last failed times.

 

Cannot read 6 bytes CS from ECU. Here you need comfort module dump (95320) support. After load comfort module dump you will get window

It has 3 methods to decrypt comfort module dump:

u Decrypt 7 bytes CS from dump file (usually we select this method)

u Get CS from ECU EEPROM dump

u Have 6 bytes CS

 

Decrypt success :

You will get the 7 bytes CS and PIN after decrypt success. So make dealer key is very easy. No matter 48 or 46, no matter lost all key or add key, they are all same.

 

Decrypt failure:This type rarely happen

Add Key

Lost All key: this type need use try start method to find working key. Try times belong to 0-255. First try need start from 0, if failed in the procedure, record the failed times. Next time, try start with last failed times. Number 6 (Unlock 46 key) only unlock the temp key under try start method under decrypt failure method

 

5th immobilizer system

 

VW Passat B6/CC – CAN (Support OBD lost all key)

VW Passat B6/CC with EDC17/MED17 – CAN (Support OBD lost all key)

 

 

Ø Passat/CC 46 Transponder learned key failure, verify “Dealer Key”. If you get “NO” mean ignition key is not dealer key. You need prepare dealer key first. Don’t worry about “Locked Key” value, dealer key can be learned without test this item. Please check other failure reason

Ø Passat/CC lost all key, dont know transponder type, Prepare a 48 transponder and a 46 transponder, insert to ignition switch one by one, verify “Transponder type OK”. If you get “YES” mean the immobilizer system use this type transponder

 

K-Line Instrument/Immobox

 

Instrument Cluster – Magneti Mareli – Shadow 2 (Passat)

 

Adapt Unit

 

Passat B6 /CC Comfort module

 

Ø You can load EEPROM dump (95320) for 2nd hand comfort module, or type in known PIN/CS manually

Ø Press button “Read” . It requires input power class for 2nd hand module。

Attention: the working key in 2nd hand comfort module will stop work after success reading, it can start work after write with correct 7 bytes CS. This usually happen for adapt original comfort module in car, because the comfort module have working key

Ø Input new Immo No, VIN, power, total 7 bytes CS, PIN, press button “Write”

Ø Note: Comfort module power class can change via adapt unit

 

Instrument EEPROM: Decrypt for PIN, KM, and set new KM

 

Passat B6 Comfort module component protection data [95320]

 

Steering lock VW Passat 6 Security code [68HC908]

 

Passat VDO 1991 mileage [93C56]

Passat VD202 1993 mileage [93C46]

Passat GT mileage [93C46]

Passat GT mileage [93C56]

 

Copy Protected by Chetan's WP-Copyprotect.