Xhorse Condor Dolphin key cutting machine

Xhorse Condor Dolphin key cutting machine

2014 Ford Fusion Simple Code Fill with Dolphin XP005/XP005L

One customer lost his 2014 Ford Fusion keys, and he wanted to get the factory key code to cut new keys. He picked up the car door and got the bitting, but the first cut was missing. He knew it was HU101, so he tried to find bitting by Xhorse Dolphin XP005L with Key Tool […]

Read More

Xhorse Condor Dolphin key cutting machine

How to Replace Xhorse Dolphin XP-005L Touch Screen?

If the touch screen of Xhorse Dolphin XP005L key cutting machine cannot turn on, you’d better take apart the screen to check if the cables are loose. If the problem cannot be solved, please change a new screen. Steps to replace Dolphin XP005L touch screen: Step 1: Remove the back case and handle Remove all […]

Read More

Xhorse Condor Dolphin key cutting machine

Xhorse Dolphin XP005L with M5 Clamp Cut Lexus Keys Error Solution

I used Xhorse Dolphin XP005L to cut Lexus keys. When I was using the M5 clamp, on the B side, whenever I tightened the clamp, the key lifted out of the clamp. I put the key in between those four raised areas, and I noticed these raised areas on the clamp too. I was not […]

Read More

Condor DolphinXhorse Condor Dolphin key cutting machine

How to Solve Xhorse Dolphin XP005/XP005L Error Code 42?

Customer problem: I use my new Dolphin XP005L and key tool max pro to cut Hon66. It is already calibrated. When I send the order to cut, it reaches 1%, the red light comes on and prompts “error code 42”. I already tried another cutter and tried, but the error still exists. Here is the suggestion: Step 1: […]

Read More

Xhorse Condor Dolphin key cutting machine

Xhorse Dolphin XP005/XP005L Height Level Adjustment Guide & Tips

When to do height level adjustment for Xhorse Dolphin XP005/XP-005L automatic key cutting machine? How to do it? Check the answers below. When should you do it? After a firmware update After you break a probe or cutter Whenever you want to change the cutter size. How to adjust height level? It’s very simple! Click […]

Read More

Condor DolphinXhorse Condor Dolphin key cutting machine

How to Solve Dolphin XP005 Cut HU198T Error Code: 33?

Customer problem: I can’t cut hu198t from dolphin xp005 machine or app. App shows this message “error code: 33 cutter diameter too larger”. Here is the solution: 2.5mm won’t work on that, needs smaller like it says. You need to use the 1.5mm cutter and probe. Refer to: How to Solve Dolphin XP005L Error Code: 33 cutter diameter too large? Tech support: Email: […]

Read More

Xhorse Condor Dolphin key cutting machine

How to Connect Xhorse Dolphin XP005 Sensor?

Customer problem: One of the sensors of my Dolphin 1st generation died. I purchased the same sensor but it comes with 4 wires. Any idea where the white wire goes? The solution: I had the same problem on dolphin xp005 and I fixed it with the following wiring. If you have the same problem, use the above method to […]

Read More

Xhorse Condor Dolphin key cutting machine

Xhorse M5 Clamp Upgrade: Available for Condor XC Mini Plus/Plus II and Dolphin XP005/XP005L

Good news! Xhorse releases a new upgrade on M5 Clamp. Now it can work with all Xhorse automotive key-cutting machines incl. Condor XC-MINI PLUS II, Condor XC-MINI PLUS, Condor XC Mini, Dolphin XP005L, and Dolphin XP005.   What is Xhorse M5 Jaw/Clamp? Xhorse M5 Clamp is used for Single-sided, double-sided, and high-security keys. M5 is […]

Read More

Xhorse Condor Dolphin key cutting machine

Ford Transit FO21 TIBBE Key Cut by Dolphin XP005 with M3 Clamp

Xhorse Ford M3 Clamp is mainly used for Ford/ Citroen TIBBE Key Blade with Xhorse Condor XC-MINI Plus/Plus II and Dolphin XP005/XP005L. It’s very easy to cut key with the on-screen prompts. Let’s go to see how it works with XP005.   Preparation: One original Ford TIBBE key and one new key blank Android or […]

Read More

Xhorse Condor Dolphin key cutting machine

How to Fix Xhorse Dolphin XP005/XP005L Error Code 80: Device Initialize Error?

Issue: Use Xhorse Dolphin XP005L alone or use Dolphin XP005 with Key Tool Max Pro/smartphone to cut keys, appears “error code 80, device initialize error” as shown in the figures below. Xhorsetool.com engineer’s suggestion: 1.Update firmware, calibrate machine, and try again 2.If not solve, go to perform Electrical Conductivity Measurement Device information>> Electrical conductivity measurement>> follow the on-screen instruction below […]

Read More

Xhorse Condor Dolphin key cutting machine

How to Cut Honda Keys with Xhorse Dolphin XP005L Successfully?

One customer has a 2009 Honda CR-V, and wants to cut new key using Xhorse Dolphin XP005L key cutting machine. He’s not a complete beginner but he hasn’t had the chance to do any Honda keys yet. So he wants to reach out before his appointment so he could be better prepared. Here have collected […]

Read More

Copy Protected by Chetan's WP-Copyprotect.