Xhorse VVDI Key Tool Max Pro comes with an OBDII cable can generate and program remote same as Key Tool Max and Mini OBD Tool. It has been tested and confirmed that both of them work with VVDI XNHO00EN wireless remote key successfully adding new remote to Honda Civic FD 2006-2011 46 chip 433MHZ.
1.VVDI Key Tool Max Pro Generate and Program remote on Honda Civic FD 2011
Original remote chip 46 on board 433MHZ
Generate with VVDI XNHO00EN remote (HONDA wireless)
Connect Key Tool Max Pro to the vehicle’s OBDII port via the OBD cable
Step 1: Generate remote
Tap remote program>> HONDA>> CIVIC FD>> civic FX_433_ID46 2161 (433.92 FSK)
Put VVDI XNHO00EN remote into the signal coil of KEYTOOL Max Pro
Then press ‘Generate Remote’
Wait a moment to write data
Burn success
Generate again with VVDI XNHO00EN remote
Burn success as well
Step 2: Program remote
Turn on the ignition switch on with working key
The green security light goes off after the ignition is turned on
Tap IMMO PROGRAMMING>> HONDA>> CIVIC>> Immo system-46 (2006-2011)
Press ‘IMMO programming’
Select ‘Add a key’
Just follow the on-screen instruction to operate step by step
Turn off ignition switch
Insert the working key and switch ignition on
Turn off ignition switch
Turn on the ignition switch. If no response within 10 seconds, turn off/on the ignition switch again
Turn off ignition switch
Insert the new key and switch ignition on within 15 seconds
Turn off ignition switch
Turn on ignition switch
Check if the indicator light is out
Now is YES
Turn off ignition switch and then turn on
Program completed
The new remote can start the car, and remote function automatic working after programming chip
- VVDI Key Tool Max with Mini OBD Tool Generate and Program Remote on Honda Civic FD 2008
Connect Mini OBD Tool into the vehicle’s OBDII Port
Use VVDI XNHO00EN remote (HONDA wireless)
Step 1: Generate remote
In Key TOOL MAX menu
Tap Vehicle remote>> HONDA>> CIVIC FD>> civic FX_433_ID46 2161 (433.92 FSK)
Put VVDI XNHO00EN remote into the signal coil of KEYTOOL Max Pro
Then press ‘Generate Remote’
Burn success
Step 2: Program remote
Use the working key to turn ignition switch on
Move to Mini OBD Tool menu
Connect VVDI Key Tool Max with Mini OBD Tool via Bluetooth
Tap IMMO PROGRAMMING>> HONDA>> CIVIC>> Immo system-46 (2006-2011)
Press ‘Start EXECUTION’
Select ‘Add a key’
Then follow the on-screen instruction to operate step by step
The steps programmed by Key Tool Max and Mini OBD are the same as Key Tool Max Pro.
Program remote successfully and the remote works good.
Done!
