Use Xhorse VVDI Key Tool Max Pro with VVDI XM38 to generate and program new smart remote on Toyota VIOS G Limited Year 2012 perfectly, no need Mini OBD Tool!
VVDI Key Tool Max Pro comes with an OBD cable can perform immo programming and remote generation same as Key Tool Max and Mini OBD Tool.
1.Connection
Connect Key Tool Max Pro to vehicle via the OBD cable
2.Check original remote
Put the original car key into the coil of KEYTOOL Max Pro
Tap transponder clone>> read transponder
Read out the transponder is 4D 71 (40BITS) 433MHZ
3.Program new remote
Put battery CR2032 into VVDI XSTO01GL and put into signal coil
Tap remote program>> TOYOTA>> 0140 433.92 ASK
The remote programming process is approx. 2 mins
Burn success
4.Add new key
Back to the main menu
Tap IMMO PROGRAMMING>> Select by type>> Smart key system>> Type 2 (8A/4D+ CAN)
Turn ignition on
Press IMMO Programming
Tap Add key
Switch ignition on then press OK
It shows the number of registered key is 2, and the number of keys that can also be registered is
Follow the on-screen instruction to keep touching the ignition switch with sign surface of a registered key, complete the operations within 30 seconds after clicking OK
After touching, we hear 1 beep
Click OK and keep touching the ignition switch with sign surface of the key to be registered within 30s
If key sound once, take the key father away. If key sound twice, it is programmed successfully.
Key detected, programming…
Keep the key touching the ignition switch
Make sure all steps are completed, and wait for registration to complete
Keep registration succeeded
Now the number of registered key is 3, and the number of keys that can also be registered is 4.
Finally, test the new smart key
Remote is OK, and start the car normally
VVDI Key Tool Max Pro can charge battery, detect leakage and voltage as well, check Xhorse VVDI Key Tool Max Pro Test: Charge Battery+ Detect Leakage/Voltage (Attach IMMO Programming List)
