Xhorse Toyota 8A Non-smart key adapter is a new cost-effective adapter. It works well with VVDI2 or VVDI Key tool Max plus Mini OBD Tool without disassembling the IMMO box. It supports the car models incl. Levin, Corolla, Rav4, Land Cruiser Prado, Camry, Highlander, Reiz and Sienna. No need token and license! Here share the detailed guide to do Toyota 8A all keys lost programming.
Make sure your device has updated to the latest version for this function
Check the wiring diagram about Toyota 8A adapter with VVDI2/ Key tool Max& Mini OBD Tool
Note: Very important!!! During the process, don’t insert the key, and keep ignition off!
Tips& Guide to program Toyota 8A all keys lost:
Disconnect the positive pole of the car battery to protect the connector and avoid short circuit
Connect the fuse box
Unplug the relay
Plug the J3 harness interface
Connect the steering wheel ignition harness
Unplug the ignition plug and insert J5 ignition plug
Plug into the OBD2 port of the car
Connect Toyota 8A all keys lost adapter and connect the battery
Then start to generate chip by VVDI2 software or key tool max software interface
When finish generating, restore the original car’s harness, otherwise the fuse box and devices will be burned after directly starting.
Finally test generated transponder
Please kindly notice:
Different 8A models have different wiring connection. Check the corresponding model below.
4.Toyota Land Cruiser Prado year 2017/2018
5.Toyota Camry year 2015/2016/2017
VVDI 2+Key tool max+ Toyota 8A all keys lost adapter program non-smart key:
Xhorse Toyota 8A Non-smart Key Adapter for all Keys lost: http://www.xhorsetool.com/wholesale/xhorse-toyota-8a-non-smart-key-adapter.html
Xhorse VVDI2 Key Programmer full version: