Dolphin XP005L Tag Archive
Xhorse Key Tool Plus No Free Token after Binding Dolphin XP005L Solution
Customer problem: I successfully bound Dolphin XP005L and Xhorse Key Tool Plus, but when I tapped account to check token on the bound device, there was no free token. Xhorsetool.com engineer replied: Please log in your account on your Key Tool Plus, select “Update” on the main interface Choose “Device synchronization” option to sync the […]
How to Solve Dolphin II XP005L Calibration Error Code: 28?
Customer problem: My Dolphin II XP005L cannot calibrate. It gives an error “Error Code: 28”. The solution: Please follow the method below to operate. 1.Disassemble the casing 2.Loosen these three screws on the Y-axis but do not remove them 3.Perform calibration again Tech support: Email: Sales@xhorseTool.com Skype: VVDI2shop.com Whatsapp: +8613343421783 www.xhorsetool.com
How to Fill Code for 2006 Chevrolet Silverado GM39?
Here are two methods to fill code for 2006 Chevrolet Silverado GM39. Case: The car door is missing three cuts including 1, 2 and 10. We can do a code fill. Method 1: by Xhorse Dolphin XP005/XP005L Select Vehicle database>> Chevrolet>> Silverado>> 2000-2006>> GM39 It automatically loads the correct key profile It lost first, 2, […]
How to Detect Xhorse Dolphin XP005/XP005L Battery?
Recently, some customers gave feedback that the battery of Xhorse Dolphin XP005/ XP005L key cutting machine cannot charge normally. Xhorsetool.com engineer gives the related solution as follows. Step 1: Make sure Dolphin XP005/XP005L update to the newest software. After the upgrade is complete, open Xhorse APP to check the battery info. Go to Device Info>> […]
How to Check Battery Info of Dolphin XP005L?
Customer problem: I used Dolphin XP005L to work with VVDI Key Tool Max Pro, but I couldn’t charge XP005L as the charging didn’t work. Here is the suggestion of Xhorsetool.com engineer. Please check the battery info and send it to us to confirm the result. Two methods to check battery info: Method 1: Connect Key […]
How to Check Battery Status of Xhorse Dolphin XP005L?
Some customers don’t know how to tell if the Xhorse Dolphin XP005L Key Cutting Machine‘s battery works well. Here xhorsetool.com shares the method below. Steps: Go to Dolphin XP005L/ Xhorse App menu Select Device info>> key cutting machine>> power>> battery machine Send the battery info to our customer service and we will tell you the […]
Xhorse Dolphin XP005L Cut 2017 BMW X5 Key HU100R
How to cut a smart key for a 2017 BMW X5 (HU100R) by Xhorse Dolphin XP005L Key Cutting Machine? M5 Clamp is required to perform this function. Decrypt the original key code, and then cut the new key. First Step: Decrypt the Original Key Code Select Vehicle Database>> BMW>> X5>> F15 (2013-2018) Use the Xhorse […]
Xhorsetool.com March Big Sale: Up to 55% OFF (VVDI Super Chip 50pcs Only US$99)
Xhorsetool.com is having a big sale in March 2024 (Mar.19th-28th). VVDI Super Chip XT27A01 XT27A66 Transponder is on sale for the first time ever, only US$99/50Pcs! Have enough stock in the UK/EU/US warehouse. Don’t miss it! Besides, you also can buy hot-selling Xhorse tools such as Multi-Prog, Dolphin XP005L, Condor XC Mini Plus II, etc […]
How to Solve Xhorse Dolphin XP005L Stop Firmware Update?
One customer gave feedback that when he updated the firmware of Xhorse Dolphin XP005L key cutting machine, it took a long time to update and stopped at 39%. Here is the solution: It’s stuck. Restart Dolphin XP005L, connect to a phone hotspot via Bluetooth and update the firmware again. Tech support: Email: Sales@xhorseTool.com Skype: VVDI2shop.com […]
How to Solve Dolphin XP005L Cannot Cut Short Keys?
Customer problem: I need to cut short keys with the Xhorse Dolphin XP-005L, but it does not seem to have this capability. Xhorsetool.com engineer replied: You can cut one side with the M4 clamp and then the other side. Clamp M4 (also Jaw M4) is designed for household keys – mainly supporting standard single and double-sided keys, and also for crucifix keys. It can be used with Dolphin XP005/XP005L, Condor XC Mini Plus/Plus II […]
How to Solve Dolphin XP005L M5 Clamp Can’t Move Problem?
Problem: I wanted to remove the M5 clamp on my dolphin xp005l key cutting machine, but no matter how I rotated the handle, the clamp wouldn’t move at all. The solution: Please try to solve it with the following method. 1.Rotate this handle to remove the clamp 2.The issue is not about removal but the […]
