Have a 2014 Nissan Almera Sporttech 433MHz key without chip, use Xhorse VVDI BEE Key Tool Lite with XKB501EN Wire Remote to generate and program remote with Xhorse APP on Android smartphone perfectly.
1.Connect device
Connect VVDI Key Tool Lite to a smartphone via Type-C cable
Connect VVDI Key Tool Lite to a PCB via a programming cable
Open the Xhorse app (Download from Play Store)
Press [Connect] to allow the App to access the USB port.
If it shows “Device connect failed…” error, just open phone setting and turn on the OTG connection switch
Select Other networks connections- OTG (Open OTG function)
After OTG is turned on, Key Tool Lite will power on.
Press [Connect] to connect phone to Key Tool Lite
Device connected.
2.Generate Nissan Almera remote
Select Vehicle remote >> Nissan >> Altima 2006 433
Use a Nissan Almera 433.92 ASK Remote XK Wire Remote
Connect XK Remote with programming cable and press [Generate]
Generating remote…
Burn success
Put a battery into XK PCB, and then reinstall back to the remote shell.
3.Program new remote with manual procedure
Press the lock on all doors
Insert and remote the key from the ignition switch more than 6 times (door will cycle unlocked).
Press the lock on all doors, then press unlock button on the new remote.
Test the new remote- OK
This car has no immobilizer and chip, so the key can start the car normally.
Xhorse VVDI Bee Key Tool Lite with 6 XKB501EN Wire Remotes:
https://www.xhorsetool.com/wholesale/vvdi-bee-key-tool-lite.html