Show Xhorse Dolphin XP005L M5 clamp cutting calibration procedure.
Install the milling cutter and probe, tighten the screw after inserting the milling cutter and probe to top.
To complete the cutting setting:
Select “System” -> “Machine Parameter” -> “Cutting Setting”.
Spindle speed: medium;
Move speed: medium;
Led status: white;
Buzzer switch: Open;
and then click on “Save”.
Back to enter “Cutting calibration” , then “1.5mm”.
Make sure the key stick to the 3rd mark line.
Click on “Start” for cutting calibration, put on the protective cover.
Cutting calibration first steps finished, please continue.
Clean the metal debris.
Xhorse Dolphin XP005L Cutting calibration complete.