Xhorse VVDI Key Tool Max Pro works well with KD MAX to generate and program new remote for NETA V 2022 without any issue.
This is original 2022 NETA V smart remote. It can automatically turn on when the working key is inside the car.
Step 1: Generate new smart remote with KD MAX
Select Remote Function>> Smart key remote>> Neeza>> Neeza ID47
Put the new remote into the detection coil to generate
Generate successfully
Step 2: Program new smart remote with VVDI Key Tool Max Pro
Connect key tool max pro and the vehicle via the OBD cable
1.Check original key
Put the key into the coil of key tool max pro
Read out the chip is 47 NCF29AXX clonable
2.Check original frequency
Detect the frequency is 433.4 MHZ FSK
3.Program new smart remote
Select IMMO programming>> NETA>> NETA V>> Smart key system
Press IMMO programming
Select key count to check the current key number is 1
Then select key programming
Follow the prompt to put the new key to be matched into the induction area with the key mark behind the cup holder, and take the other keys out of the car.
Press OK to programming key
New smart remote key is programmed successfully
Check key count again, the current key number is 2 now.
Finally, test the new key
Test the remote OK
Automatically turn on when put the key inside the car
2022 NETA V Smart Remote is added by Xhorse Key Tool Max Pro via OBD successfully.
