Xhorse BMW BDC2 Adapter can be used to work with Xhorse VVDI2/VVDI Key Tool Plus Pad/Key Tool MIDI for BMW G chassis new key adding on bench. This guide will demonstrate how to install this adapter and VVDI2 programmer.
Step 1: Align the Adapter
- Locate the 3 alignment markers on both the Xhorse BDC2 Adapter and the BMW BDC2 module.
- Carefully position the adapter so the markers match perfectly before applying pressure.
Step 2: Secure the Adapter
- Once aligned, press the adapter firmly downward until it clicks into place.
- Engage the locking clip to prevent disconnection during operation.
Step 3: Power & Connect
- Connect VVDI2 Programmer to Xhorse BMW G Series BDC2 adapter.
- Supply 12V power to the adapter (via external power or vehicle battery).
Verification:
The adapter’s LED indicator will light up upon successful connection.
Note:
If the light doesn’t turn on, recheck alignment and power supply.
Read also:
