I can’t read the data to get the password with VVDI MB on w202. I have tokens to read and that’s okay but to read the password it cuts me off by reading the data why on an eis w210. The reading is done but when I go to decode the password the vvdi starts to read and it cuts off at the start.
Xhorsetool.com engineer replied:
The data you collected is wrong, please calculate key password again.
1.Open VVDI MB Tool software, click “Password Calculation”.
2.Choose OBD Mode, and then select “W204,W202(Old)” Chassis.
And then click “Data Acquisition”.
3.Insert working key to EIS before press OK.
4.Take working key out of EIS before press OK.
5.Insert working key to EIS before press OK.
6.Insert working key to “Device IR Reader” before press OK.
Then data acquisition is processing.
7.Insert working key to EIS before press OK.
Waiting for 30 seconds…
Insert working key to “Device IR Reader” before press OK.
8.Read data successfully and then save the data.
9.Upload data. And then click Query Result, the password will display on the screen