Xhorse Key Tool Max Generate and Add Remote for Mitsubishi Triton Plus 2015

VVDI Key Tool Max

Written by:

It has been confirmed that VVDI Key Tool Max with Mini OBD Tool successfully generate & program remote and clone chip 46 with VVDI super chip XT27 to Mitsubishi Triton Plus 2015.

Main operation steps:

1.Generate remote

2.Add remote

3.Clone chip 46

1.Generate remote

After connecting VVDI Mini OBD Tool into OBDII port of the vehicle

Enter KEYTOOL MAX menu

Select “Vehicle Remote”-> “Mitsubishi”-> “TRITON”-> “TRITON 433 10-15 1337”

Connect XK remote and then click “Generate remote”

Burn success

Put battery and install into remote shell

2.Program remote

Go to Mini OBD menu

Connect Key Tool Max with Mini OBD Tool via Bluetooth

Select “IMMO Programming”-> “Mitsubishi”-> “Remote program setting”-> “Type 3”

Turn the ignition on and then click “Start execution”

Select “Remote Key Adaptation”

Switch ignition on, click “confirm” to continue

Note: This function will clear all programmed remotes.

Prepare all remotes to continue

When the current remotes are all cleared, click “OK” to continue.

Now the number of remotes is 0, press “UNLOCK” button of the remote you want to program 3 times in order within 30 seconds.

Program successfully and test the remote can work

3.Clone chip: 46 with XT27 super chip

Put the XT27 chip into the coil of Xhorse Key Tool Max

Select “Transponder clone”-> “Read Transponder”

Read out the chip is46 PCF7936 successfully, then press “Clone”

Read ID46 online calculation instruction and start to clone 46 transponder

Put the original key into the coil for identification

Select ID46 original clone (recommended)

Then close the Key Tool Max antenna to the ignition switch to collect the data

Insert original key to turn on ignition and turn off-> pull out the key

Repeat the step until it’s done

Put the original key into coil of key tool max again

Check the collecting data-> query the calculated results from server

Put the VVDI XT27 into coil

Finally, clone the chip 46 successfully and use it to start the car normally

All devices need:

Xhorse VVDI Key Tool Max with VVDI MINI OBD Tool Free Xhorse Renew Cable:

https://www.xhorsetool.com/wholesale/vvdi-key-tool-max-with-mini-obd-tool.html

Xhorse VVDI Super Chip XT27A01 XT27A66 Transponder:

https://www.xhorsetool.com/wholesale/vvdi-super-chip.html

Copy Protected by Chetan's WP-Copyprotect.