Xhorse Mini OBD Tool can read password and program 4A keys to Renault Duster with free PIN.
Here is the detail.
Step 1
Read Password
Plug Mini OBD into the OBDII port of vehicle
Open Xhorse app, and switch to MINI OBD page.
Tap Immo Programming>> Renault>> Immo system>> INDIA >> Triber>> Flip-key>> Start execution>> Read password
Switch ignition on
Wait a moment to read password till the process is done
Read out vehicle ISK and PIN info
Step 2
Program Keys
Select ‘Program keys’
Switch ignition off and remove key
PIN code is automatically input
Just press ‘OK’ to continue
Insert a new key to switch ignition on.
Program successfully
Click ‘Yes’ to add another key
Perform the same key programming steps above
After programming successfully, select ‘No’ to stop programming another key
Turn the ignition of for 5 seconds and turn on again
Program complete!
Finally, test the new keys, work fine!
Renault Duster BCM IC95040 key also can be programmed using Xhorse Mini Prog and VVDI Key Tool Max.
Step 1: Clone transponder by Xhorse Key Tool Max
Step 2: Read BCM IC95040 data by Mini Prog
Step 3: Write EEPROM data to transponder with Key Tool Max
Check VVDI Mini Prog+ Key Tool MAX Read and Write Renault Duster BCM IC95040